alpalwal

I finally got my motor dropped in the car yesterday and I'm trying to get the wiring harness all sorted out.. 89 240 with a s14 ka.
I need a hand with the last couple plugs... any help would be appreciated

1. This plug is in a bundle with the two coolant sensors on the front of the intake mani... it fits in with the knock sensor, but I wasn't sure if the s13's had knock sensing (it's a s14 ka and the sensor came on it)


2. three wires that branch off after the injectors... teal, yellow, and green with grey stripes... what's missing?



3. comes right out of the main fuse box... 2 plugs with no home



4. This is off the bundle that goes over by the maf.
4 plugs from left to right
first 2 need to be on the black thing and grounded or the engine gets no spark.... they were on the stock coil. What are they and how can i clean up the setup for them?
next 2 plugs.... one is the coil? I don't have a stock coil and I don't know which plug to cut off. is the one that's not the coil IAT sensor?



Here's my baby... should be running in 2 weeks max

stillnoturbo

Why can't you use your old stock harness?