CALLING ALL 240sx OWNERS *pics*
 

I finally got my motor dropped in the car yesterday and I'm trying to get the wiring harness all sorted out.. 89 240 with a s14 ka.
I need a hand with the last couple plugs... any help would be appreciated

1. This plug is in a bundle with the two coolant sensors on the front of the intake mani... it fits in with the knock sensor, but I wasn't sure if the s13's had knock sensing (it's a s14 ka and the sensor came on it)
http://img85.imageshack.us/img85/545...0005kc7.th.jpg

2. three wires that branch off after the injectors... teal, yellow, and green with grey stripes... what's missing?
http://img101.imageshack.us/img101/5...0006py7.th.jpg


3. comes right out of the main fuse box... 2 plugs with no home
http://img114.imageshack.us/img114/3...0007lf4.th.jpg


4. This is off the bundle that goes over by the maf.
4 plugs from left to right
first 2 need to be on the black thing and grounded or the engine gets no spark.... they were on the stock coil. What are they and how can i clean up the setup for them?
next 2 plugs.... one is the coil? I don't have a stock coil and I don't know which plug to cut off. is the one that's not the coil IAT sensor?
http://img85.imageshack.us/img85/196...0008uw0.th.jpg


Here's my baby... should be running in 2 weeks max
http://img161.imageshack.us/img161/1...0002vg9.th.jpg

Re: CALLING ALL 240sx OWNERS *pics*
 

Why can't you use your old stock harness?