Bseries tranny compatibility Q's
 

Beat me with a dumb shovel but I cant remember.

Can I use the clutch & PP from my 89' S1 on an 93ish cable LS tranny? This is determined by the flywheel used right? For some reason I keep thinking there was two different tranny output shaft spline counts depending on year.... must be the Down's kicking in...hey Corky!

Re:Bseries tranny compatibility Q's
 

92-93's Have the bigger shaft on the tranns.. I think it might be the same tooth count. But the clutch discs dont interchange.

As far as Pressure plates, I'm thinking any B-series will work out. (thinking..) ;)

Jeff

Re:Bseries tranny compatibility Q's
 

Basically I found a LS tranny to use until I find another S1. (tired of using my roomates 20sec 'door slammer' 80 Civic)

Sounds like I'm screwed unless I can score the clutch disc with it huh?

Re:Bseries tranny compatibility Q's
 

God, they cant be that much?

160 for a complete exedy kit..

Re:Bseries tranny compatibility Q's
 

Theres a Jew inside me, trying to get out......

Due to the shaft size, I need the 92-93 flywheel to use the LS tranny right?

TIA

Re:Bseries tranny compatibility Q's
 

think all the B-series flywheels are the same...

Re:Bseries tranny compatibility Q's
 

Not all B-series flywheels are the same size, but I'm pretty sure they all interchange.

You should be able to use your old flywheel with the ls tranny..

Re:Bseries tranny compatibility Q's
 

Thanks.