Broken valve spring

Reply Subscribe

Thread Tools

Search this Thread

Jun 17, 2004 | 07:09 PM

3sge

Guest

Posts: n/a

Broken valve spring

I have a broken valve spring, and I was wondering what is the best way to change the spring. I know im going to have to change the valve and the guide and get the chamber fixed where the valve was hitting. i was wondering what i might run into when takeing my head off my car since ive never done this before. like if i should just go ahead and buy new gaskets and otherthings for the head while im at it.

Jun 18, 2004 | 12:39 AM

crx2fast

3.0 BAR

Joined: Jan 2004

Posts: 4,730

Re:Broken valve spring

well if your taking the head off you want to get a new head gasket, and probly new head bolts, also a new valve cover gasket if its in bad shape. and if you got the money might as well throw some goodies in there, cams and what not, ---- whatever you want
i have personly never delt with springs before, but im sure someone on hear will give you some tips

thats my .02 cents

Jun 18, 2004 | 02:49 AM

quadnie

3.0 BAR

Joined: May 2003

Posts: 3,365

Re:Broken valve spring

I've handled a couple broken OHV springs in my day.. valve float is bad.

What motor are you talking about?

You're going to need a head gasket to start with.. consider valve cover, intake, exhaust gaskets and timing belt while you are at it.