The top sensor (green label), is the purge control valve for the evap system. You will NOT need it, in fact it should just be mounted with 2 10mm bolts. Just take it off.'

The TPS is damaged and will need another tps, you will have ot grind the break-away screws off, and use new (normal screws) with the new sensor.

The purple sensor, is your idle air control valve. Normally a line off the back of the block will go into that 1st nipple.

The sensor underneith the throttle body (no connectors) is the manual idle air control valve. Be sure that coolant does flow through this or you will have idle problems.

Sensor on top of the t-body is the MAP sensor.

Jeff

 

he said 4 Jeff, by your list thats 5...

 

I was identifing all the sensors in the pic.. Do you have a problem with that?

 

nope, i was accually woundering what that thing below the tb was anyway...

 

thanks guys..now i just have to find out what to do with the MAP sensor cause i have an HF and my MAP is in a box on the fire wall.. =(

 

pick one and use it. just leave the other one unplugged...

 

the line off the block is coolant right?>

 

yup