b18a1 LS vacuum lines ??
#11
Re:b18a1 LS vacuum lines ??
The top sensor (green label), is the purge control valve for the evap system. You will NOT need it, in fact it should just be mounted with 2 10mm bolts. Just take it off.'
The TPS is damaged and will need another tps, you will have ot grind the break-away screws off, and use new (normal screws) with the new sensor.
The purple sensor, is your idle air control valve. Normally a line off the back of the block will go into that 1st nipple.
The sensor underneith the throttle body (no connectors) is the manual idle air control valve. Be sure that coolant does flow through this or you will have idle problems.
Sensor on top of the t-body is the MAP sensor.
Jeff
The TPS is damaged and will need another tps, you will have ot grind the break-away screws off, and use new (normal screws) with the new sensor.
The purple sensor, is your idle air control valve. Normally a line off the back of the block will go into that 1st nipple.
The sensor underneith the throttle body (no connectors) is the manual idle air control valve. Be sure that coolant does flow through this or you will have idle problems.
Sensor on top of the t-body is the MAP sensor.
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
Stephen
Turbo Parts For Sale
5
04-16-2007 11:39 PM