91rexBUG

alright...got a question here...i got a 91 crx hf right now...im gonna put an odb0 b18a1 LS motor in there....is there a specific sequense my vacuum lines go or do i have to modify anything to the vacuum lines...or can i just plug them in as they fit

lewis

iwouldhitit

im have the same probably..do you have that box on your fire wall that has all your vac lines going in to? do we just hook up the b18 lines there?

by the way what year is your motor?

HMT-Admin

You have 1 important vacuum line.. and that is Map sensor, the rest are emission/control purge devices that do jack ----. You should be able to hook them up without any problems.

Jeff

91rexBUG

thanks jeff....any specific place on the manifold i should plug the map sensor vacuum line or do i just put it on one of the available plugs there ?? and the rest of them i take i can plug into empty spots and if need be tee-off the other lines if extras ?

lewis

my motor is from a 91 teg...b18a1...and yes i have the vacuum (black) box up in my engine bay.

turbohf

anyone of them that accually has good vacuum. the one that is on top of the throttle body thats angled doesnt have any vacuum. anyother one is fine...

91rexBUG

cool...thanks guys....answered my questions

iwouldhitit

what about the line coming off the charcol(sp) thing?

HMT-Admin

the red braided one? that also goes on top of the t-body..

its ---- as well

Jeff

iwouldhitit

yea the red one..but i have no nipples for a line on my TB
..if it ---- then i dont need to hook it up and i can just rip it out..=)

as you can see theres is none..by the way what are those 4 sensors? i really need to get me a haynes book

turbohf

the sensors are: IACV (with the water hose), MAP (top of t-body), TPS (the fucked up one), not sure what the other one is...