Ok i have a totalled civic with a b16a obd 1 engine in it, is there any way i could switch over the hydraulic system into the crx to use the y21 trans without having to get the hydro to cable conversion the crx is already converted to obd1 with a d16z6 engine in it now any help thanks!!!

 

Learn to fab your own hydro clutch system to replace the cable, or just buy a hydro to cable conversion.

 

thats probably what i'm goin to end up doing. i was just wondering if anyone had put the master clutch cylinder in a crx before

 

yea you can just swap over the pedal master cylinder and then all the lines...if you have a totaled car then just pull the parts from the...mostlikely you will have to make custom lines but you can make it work, i have seen it done on HT :P

 

thats all i needed to hear... i'ma start pulling parts off when i start installing them i'll take some pics and post em up