B16A with LS pistons?
#13
Re:B16A with LS pistons?
i dont know were you get your info but the gsr even usdm isnt 9.7:1 thats about .3 off of the actual CR which is 10.0:1 and thats the 93 gsr. the 94-and up also have a CR of 10.0:1 as you ca see from the chart:
Honda B18c1 Specs
--------------------------------------------------------------------------------
• DOHC VTEC 4 Cylinder 16 Valve
• Hydraulic Transmission
• Diplacement: 1797cc
• Torque: 128 lb-ft@6200
• Horse Power: 170hp@7600
• Compression Ratio: 10.0:1
if you need to brush up on your engine info go to this site :
http://www.streettuners.com/curve/en...ine_specs.html
Honda B18c1 Specs
--------------------------------------------------------------------------------
• DOHC VTEC 4 Cylinder 16 Valve
• Hydraulic Transmission
• Diplacement: 1797cc
• Torque: 128 lb-ft@6200
• Horse Power: 170hp@7600
• Compression Ratio: 10.0:1
if you need to brush up on your engine info go to this site :
http://www.streettuners.com/curve/en...ine_specs.html
#14
Re:B16A with LS pistons?
Originally Posted by EcKs93
i dont know were you get your info but the gsr even usdm isnt 9.7:1 thats about .3 off of the actual CR which is 10.0:1 and thats the 93 gsr. the 94-and up also have a CR of 10.0:1 as you ca see from the chart:
Honda B18c1 Specs
--------------------------------------------------------------------------------
• DOHC VTEC 4 Cylinder 16 Valve
• Hydraulic Transmission
• Diplacement: 1797cc
• Torque: 128 lb-ft@6200
• Horse Power: 170hp@7600
• Compression Ratio: 10.0:1
if you need to brush up on your engine info go to this site :
http://www.streettuners.com/curve/en...ine_specs.html
Honda B18c1 Specs
--------------------------------------------------------------------------------
• DOHC VTEC 4 Cylinder 16 Valve
• Hydraulic Transmission
• Diplacement: 1797cc
• Torque: 128 lb-ft@6200
• Horse Power: 170hp@7600
• Compression Ratio: 10.0:1
if you need to brush up on your engine info go to this site :
http://www.streettuners.com/curve/en...ine_specs.html
This is a great tool to find out compression ratios using mix matched parts.
http://www.c-speedracing.com/howto/c...c/compcalc.php
Jeff Frank
Thread
Thread Starter
Forum
Replies
Last Post
Guy-Fast
Turbo Parts For Sale
0
08-11-2005 06:09 AM
robs99si
Forced Induction
5
05-05-2003 11:19 AM