HomemadeTurbo - DIY Turbo Forum

Forced Induction Custom FI Setup Questions

Supra TT pistons + B16a Rods = D16A6

   
Old 01-03-2003, 02:32 PM
  #1  
1.0 BAR
Thread Starter
 
89 CRX Si's Avatar
 
Join Date: Dec 2002
Posts: 329
Default Supra TT pistons + B16a Rods = D16A6
Ok. is there any mods other then notching the block?

Where can I get a set of 6 Supra TT pistons?

THX guys

post your views on doing this here
89 CRX Si is offline  
Reply
Old 01-03-2003, 03:36 PM
  #2  
3.0 BAR
 
shortyz's Avatar
 
Join Date: Dec 2002
Posts: 3,396
Default Re:Supra TT pistons + B16a Rods = D16A6
i wanna look into that also.

your best bet would be on a supra forum to find the pistons..
shortyz is offline  
Reply
Old 01-03-2003, 03:44 PM
  #3  
1.0 BAR
Thread Starter
 
89 CRX Si's Avatar
 
Join Date: Dec 2002
Posts: 329
Default Re:Supra TT pistons + B16a Rods = D16A6
Ya no supra TT at pick your part haha

any idea on how much new from dealer?
89 CRX Si is offline  
Reply
Old 01-03-2003, 06:18 PM
  #4  
3.0 BAR
 
shortyz's Avatar
 
Join Date: Dec 2002
Posts: 3,396
Default Re:Supra TT pistons + B16a Rods = D16A6
Originally Posted by 89 CRX Si
Ya no supra TT at pick your part haha

any idea on how much new from dealer?
o jesus. i dont wanna know.
shortyz is offline  
Reply
Old 01-03-2003, 06:31 PM
  #5  
1.0 BAR
Thread Starter
 
89 CRX Si's Avatar
 
Join Date: Dec 2002
Posts: 329
Default Re:Supra TT pistons + B16a Rods = D16A6
ya true
89 CRX Si is offline  
Reply
Old 01-04-2003, 02:04 AM
  #6  
0.0 BAR
 
DJ0820's Avatar
 
Join Date: Dec 2002
Posts: 23
Default Re:Supra TT pistons + B16a Rods = D16A6
http://www.honda-tech.com/zerothread?id=267641 go there

Later,
Derek
DJ0820 is offline  
Reply
Old 01-04-2003, 03:22 AM
  #7  
3.0 BAR
 
BLACKSI's Avatar
 
Join Date: Dec 2002
Posts: 2,101
Default Re:Supra TT pistons + B16a Rods = D16A6
b16 rods will not fit on a a6 crank with out machine work just so you know.

Beau
BLACKSI is offline  
Reply
Old 01-04-2003, 03:54 AM
  #8  
3.0 BAR
 
shortyz's Avatar
 
Join Date: Dec 2002
Posts: 3,396
Default Re:Supra TT pistons + B16a Rods = D16A6
guy sed u use b16a bearings and they fit..
who do i believe
shortyz is offline  
Reply
Old 01-04-2003, 02:54 PM
  #9  
1.0 BAR
Thread Starter
 
89 CRX Si's Avatar
 
Join Date: Dec 2002
Posts: 329
Default Re:Supra TT pistons + B16a Rods = D16A6
Originally Posted by BLACKSI
b16 rods will not fit on a a6 crank with out machine work just so you know.

Beau
you sure? He said that the b16a bearings if used will fit the d series crank with out modifications....


Who knows
89 CRX Si is offline  
Reply
Old 01-04-2003, 03:37 PM
  #10  
Administrator
 
HMT-Admin's Avatar
 
Join Date: Dec 2002
Posts: 13,991
Default Re:Supra TT pistons + B16a Rods = D16A6
No B-series rod will fit in the d16's without mods, you will need to take them to the machine shop and get a rods resized and a new bushing's for the wrist pin, Its about an 80-120 buck job if I remember correctly.

Jeff
HMT-Admin is offline  
Reply

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search
Quick Reply: Supra TT pistons + B16a Rods = D16A6


Reply Closed Thread Share

All times are GMT -5. The time now is 03:44 AM.