J-MAN

that way is so much easier, don't know why people would swap the whole gas and brake pedal

FooK

I converted mine before you converted yours, dick.

J-MAN

sim-a-down-now i did mine in 2003 so i think i got at leats one of you beat .
but for real every post i look at about this i see me and **** replying. on almost every site i goto. we should all just get together and do one and do a write up

FooK

I've done it already, heh. I'll post it here.

J-MAN

lol, i did one too on hondaswap but i guess when they updated the server/site it got lost

shanerv

If i remember correctly an Ek is a 96-00 inwhich you'll have to deal with a hydro clutch if that's the case? My car's a 93 and I just grabbed a 5spd pedal assemble from a 91 civic because I wanted to save many hassle's and $$$ by going with a Cable tranny. I'm not sure about the newer civic'c(96-00) but in my case I didn't have to pull the dash parts. Just the lower ones where you would kick them with your legs. In my case you'd have to drop the steering column and take all the pedal connections off (brake slave, gas cable etc)and then just loosen the bolts and pull it out. But getting back to your origional question you will have absolutely NO probs by driving an auto with a 5spd pedal assemble before the swap. Hope everything works out will for you. I did my ls/vtec swap at the same tume as going 5spd and I wish I would have thought about doing the pedal conversion beforehand

MikeJ-2009

You have a cable transmission on your ls/vtec? You said your car was a 93, and unless you screwed something up in that statement, it sounds like your telling everyone they can use the 91 pedal in a 93, which you can't.

5thgencivickid

when i did the swap in my eg about september i just cut my brake pedal and put ni the clutch pedal. the hardest thing was the pedals they are in the worst stop and in a eg you deff need auto to manual mount

J-MAN

yeah, why would you go back to cable tranny if you already had hydro? and why did you ahve to drop the steering wheel?