About to H22 Head on F22 Block
#11
Re: About to H22 Head on F22 Block
Well I have a P28 I am going to be installing in the car i just finished chipping and wrote an F22B1 bin to, so im going to see how that works and after ill flash it with an H22 and go from there, I didn't think it would mess with it that much, but well so. I have an Ostrich 2.0 and I'm going to get HULog to measure correction factors so, or I could build a set of ear muffs and listen for knock . But all in all I want to bustout the Innovate WB I hopefully premeditated most of the crap i needed.... hopefully
#12
Re: About to H22 Head on F22 Block
cam timing is not something corrected through the ecu. it is mechanically when the valves open in relation to where the pistons are. ie opening too soon (advanced) or opening too late (retarded)
it will also throw off the ignition timing i guess as it is run off the cam, but you should be able to adjust the dist. to get base ignition timing set correctly.
it will also throw off the ignition timing i guess as it is run off the cam, but you should be able to adjust the dist. to get base ignition timing set correctly.
#13
Re: About to H22 Head on F22 Block
Thats what i thought you meant with the relationship to it changing the cam timing, but i mean well see how it goes, i'm just questioning a couple of things but meh I dunno, its a franky anyways
#14
Re: About to H22 Head on F22 Block
ok, i thought by your post about the ecu and maps that you were confusing it with ignition timing.
if it turns out to be an issue, you can always throw a set of adjustable cam gears on it and tune it to what it likes
if it turns out to be an issue, you can always throw a set of adjustable cam gears on it and tune it to what it likes
#15
Re: About to H22 Head on F22 Block
#17
Re: About to H22 Head on F22 Block
Originally Posted by Nexus1155
that is a pretty damn cool website, but with decking i got 9.04:1 so thats not that low of a compression...
Thread
Thread Starter
Forum
Replies
Last Post
stenseltizm
Turbo Parts For Sale
15
05-20-2007 11:54 AM