Re:92 DX auto to ls/vtec 5 speed wiring Q's
 

So what I need is a straight wire from rp18 to that other point that's pointed out in red? ???

Re:92 DX auto to ls/vtec 5 speed wiring Q's
 

steeeeeeeeeeve,
rp18 has a resistor, you will desolder that, and put a straight wire in it's place.
i made the jumper pink because your GAY.

http://www.newbieforces.com/files/ecub4desolderb.jpg

Re:92 DX auto to ls/vtec 5 speed wiring Q's
 

Well guess what dumbass, I was right. ::)

You can beg for my forgiveness with cash. Thanks. :-*
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:92 DX auto to ls/vtec 5 speed wiring Q's
 

Dr. boost licks nuts.




Anyway, so the jumper wire you were refering to is nothing more than the same connection, but without the resistor? That's gay. Why didn't you just say so? ;D

Re:92 DX auto to ls/vtec 5 speed wiring Q's
 

hey folks, he now knows what a jumper wire is!!!
wooohoooooooooo!!
i knew you would get it with the pink color.
hehe.
anyway, good luck. and don't forget to take pics.
what else you need for the swap?

Re:92 DX auto to ls/vtec 5 speed wiring Q's
 

Well, a B series hydro tranny, B series shift linkage, and, uh, about $6,000 worth of everything else. :-\

Re:92 DX auto to ls/vtec 5 speed wiring Q's
 

you could get any b-series cable tranny and use the hydro to cable adapter. thought i'd throw that option at ya.

Re:92 DX auto to ls/vtec 5 speed wiring Q's
 

why do you need a hydro tranny anyways? the car should be set up to do a cable tranny swap, it's a 92 ???

Re:92 DX auto to ls/vtec 5 speed wiring Q's
 

are you new? 92 CIVIC :-*

Re:92 DX auto to ls/vtec 5 speed wiring Q's
 

hydro to cable, back to this and then that and finally my clutch engages. :P

I think I'm just gonna go with the standard hydro. They're probably more available anyway.