1G-GTE supra pistons and B16 rods for D16?
#12
Re:1G-GTE supra pistons and B16 rods for D16?
Originally Posted by chiman72
ok, I'm not starting a vitara this and that argument but it has been coverd the vitara pistons are a type of cast. The way they are manufactured and such make them alot stronger than honda and other manufacturers who cut coners and it has been proven that they can hold up to 25psi. I got them for $110 shipped with rings and i'll tell you there well worth the money.
http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WDVW
http://cgi.ebay.com/ws/eBayISAPI.dll...category=26261
met·al·lur·gy ( P ) Pronunciation Key (mtl-ûrj)
n.
The science that deals with procedures used in extracting metals from their ores, purifying and alloying metals, and creating useful objects from metals.
The study of metals and their properties in bulk and at the atomic level.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#14
Re:1G-GTE supra pistons and B16 rods for D16?
Originally Posted by chiman72
---- what ever works and is cheap is good for me.
this info is good info, but useless to me now, because my new D16 deal fell through its ok, it always happens this way.
#15
Re:1G-GTE supra pistons and B16 rods for D16?
I thought about the B16/supra pistons, but I've found that finding something that has used/tested them is just impossible...
Honda crank
LS shot-peened rods
Viagra pistons
On my rebuild ( if my Z6 ever desides to "let go", but its holding on pretty tight ).
I hear those viagra pistons stay hard all night !!!
Honda crank
LS shot-peened rods
Viagra pistons
On my rebuild ( if my Z6 ever desides to "let go", but its holding on pretty tight ).
I hear those viagra pistons stay hard all night !!!
#16
Re:1G-GTE supra pistons and B16 rods for D16?
Originally Posted by 89dxhunchback
I thought about the B16/supra pistons, but I've found that finding something that has used/tested them is just impossible...
Honda crank
LS shot-peened rods
Viagra pistons
On my rebuild ( if my Z6 ever desides to "let go", but its holding on pretty tight ).
I hear those viagra pistons stay hard all night !!!
Honda crank
LS shot-peened rods
Viagra pistons
On my rebuild ( if my Z6 ever desides to "let go", but its holding on pretty tight ).
I hear those viagra pistons stay hard all night !!!
#17
Re:1G-GTE supra pistons and B16 rods for D16?
If we only had junkyards with Toyota 1G-GTE engines around
Also, machining a b-series rod into a d-series is a bit more complicated than just notching the block. They are to fat, plus you have to resize the rod. Your looking at spending around 100 bucks at a machine shop to making a b-series rod fit in your d-series. Also if you are going to go through all the trouble in making one fit, I'd put a b16a rod in before I would use a LS rod. The b16a rod is a tad bit shorter so its going to yield a bit lower comp, also the but the rod is stronger than a ls.
Jeff
Also, machining a b-series rod into a d-series is a bit more complicated than just notching the block. They are to fat, plus you have to resize the rod. Your looking at spending around 100 bucks at a machine shop to making a b-series rod fit in your d-series. Also if you are going to go through all the trouble in making one fit, I'd put a b16a rod in before I would use a LS rod. The b16a rod is a tad bit shorter so its going to yield a bit lower comp, also the but the rod is stronger than a ls.
Jeff