my setup and build pics,will be update as i progress
 

i finally got my hands on a digital cam so i got some pics of my progress, i just got the block back from the machine shop because they had to cut the channels for the o-ring deeper. then i painted it and clearanced the crank scrapper. still have to check rod clearances and then install the o ring. way more pics to come. maybe even a how to. till then heres where things stand

http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/we...ZmQzMXk1NDE%3D

dohc zc,.20 over,crower rods,wiseco coated pistons,oem bearings,crank scraper,race engineering block guard,posted block,o-ringed,hks mls gasket,arp studs,garrett .48/.60,log mani, 3" dp,3"catback

Re: my setup and build pics,will be update as i progress
 

posted and block guard and o ring, why not just sleeve then ???

Re: my setup and build pics,will be update as i progress
 

i hope you get the how to pics going. very intrested to see/read it

Re: my setup and build pics,will be update as i progress
 

well lets see that costs $1000 when i can pay $40 for the edyne post kit, $75 for a block guard and $150 to have the o ring channel cut. all labor performed by me. so you do the math. this method will be more than enough to support my power goal of 300 safe and reliably

Re: my setup and build pics,will be update as i progress
 

i think i will do one on the o-ringing process and the proper way to stretch rod bolts and measure, as there have been alot of misconception about this.

Re: my setup and build pics,will be update as i progress
 

nice save your self alot of cash. make the do it your self on any thing you can at least id apreashate it

Re: my setup and build pics,will be update as i progress
 

Looks like a solid setup.Nice to see people building ZC's.

Re: my setup and build pics,will be update as i progress
 

zc's for teh win. the true under dog

Re: my setup and build pics,will be update as i progress
 

Around here, I guess sleeving a Honda block costs only around $350.

Looks good though :)

Re: my setup and build pics,will be update as i progress
 

well i checked the rod bearing clearances and they are tight as hell so these king bearings are goin in the trash and i have to buy oem because i don't want to line hone the rods again. kings are comparable to honda greens so they say, so i may step down to a honda yellow and plastigauge again.

http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx

then after all that work i had to make a late night run to popeyes(too much taco bell this week)