j3w

he did it himself. that's how drunk he was.

rudebwoy

got my pistons in, things are just sex.
got some new upgrades also, will be updating the 1st page with them.
I need to relocate my battery but having conflict master kill switch option. can't find enough pics of it done on civics, only one I found is an integra.
don't hate me for this, I just ordered a T1 catch can, and its taking my battery box. ordered the taylor battery box for the trunk, I need some ideas for a kill switch, or do I have to make a new thread for this?

kain

put a 250 amp breaker on the battery and a 250 amp one right in the engine bay.

rx7 guys love to relocte their batteries. if you want i can look for a write up bu its pretty simple.

just get a long as piece of gauge 1 welding wire for welder and just tun that ---- to the breaker and teh breaker directly to the battery post.

Tom-Guy

You need more than one cable to do a proper battery relocation.

rudebwoy

the taylor box kit that I ordered comes with a 2 gauge welder cable, and I orderded 15ft of 4 gauge Amp cable for the alternator. I now need a switch that will fit behind the keyhole cover or even replace the keyhole all together. I think I got it figured out. now the plan for a start terminal under the hood like the new bmw's. and a distribution block with different gauge wires.

TurboG

i'll take pictures of my set-up. you will need a diode for the trigger wire from alternator to key power( i believe) so that power can go one way but not the other so it doesnt back feed. I put my cutoff switch in the same cover as the trunk keyhole and cut part of the metal below the light.

- Power goes from fusebox(2gauge) to ON side of the switch.I have this wired straight to the starter then back to the fusebox to eliminate that clusterfuck of wire
- The white alternator charge wire now goes to the Positive side of the battery instead of fusebox
- The OFF side of the switch goes to the battery

I will post some MS paint of my diagram and pictures of how I wired it later. Looks clean where I put it.

lilpooh21186

i see the kill switch in alot where the trunk key hole is

b18.

Paint your trunk, you look like a ***.

rudebwoy

our cars have similar parts.
I hate the look of the switch on the trunk, but I have no choice.

BigBird

90dx on here is selling a taylor box and my favorite disconnect switch. The red piece pulls out when you don't need it so people can't ---- with you at the mall and ----. http://www.revscene.net/forums/showthread.php?t=546366