|
Re: Late night HMT intercooler action
I was under the impression that the "big" 16g turbo supported ~380whp. We're not shooting for tons of power, I think Chris is just wanting to run ~8-10 psi and see what kind of power he makes.
|
Re: Late night HMT intercooler action
thats a "big" 16G ........... :-\ Is that turbo also from SSauto?
|
Re: Late night HMT intercooler action
you can goto kragen, or shuckers or whateve the ---- its called on that side of the country, but they have metal adapters from 2 to 2.5 or 2 1/4 to 2.5, then just weld that onto the 2.5 pipe and then you can use a 2 inch coupler to cnnect the pipes or a 2 1/4 to connect them depending on what pipe/transition piece you have.
|
Re: Late night HMT intercooler action
The normal 16-G compressor wheel is 1.83" at the inducer and 2.36" at the exducer. The Big 16-G is 1.89" at the inducer and 2.68" at the exducer. That is just over 5/16" (8mm) larger than the normal 16-G exducer and the same size as the GReddy 18-G (inducer diameter is only .10" smaller than a 18-G). Thanks Scott, I'll have to check that out :) Oh, and yes its from ssauto http://www.ssautochrome.com/level.itml/icOid/1489 Scroll to "EVO 3 16G Ported Turbo/DSM" |
Re: Late night HMT intercooler action
dan, you still need to bore those seals out a little bit.
|
Re: Late night HMT intercooler action
Originally Posted by NBLKID
i boosted 10-12 punds on a rubber elbow and never had a problem....
also for the 2.5 to 2.25 trasition just use the 2 " couplers....the hd couplers can stretch quite a bit |
Re: Late night HMT intercooler action
Originally Posted by NBLKID
i boosted 10-12 punds on a rubber elbow and never had a problem....
You can use it on the intake side, but on the compressor side you run that ---- at your own peril. You'd do better to use PVC on the cold side.... A friend ran a PVC elbow into his Mitsu TD04HL-18T with no problems. The car was his daily driver, plus he took it to five or six track events.... |
Re: Late night HMT intercooler action
I use the exact same elbow right off of my turbo and it's just fine. The only problem I can see is with it being closer to the exhaust manifold.
|
Re: Late night HMT intercooler action
Originally Posted by jagojon3
I use the exact same elbow right off of my turbo and it's just fine. The only problem I can see is with it being closer to the exhaust manifold.
|
Re: Late night HMT intercooler action
Originally Posted by mike saunders
How much boost are you making? Maybe if you're under 10 psi that POS will work, but not for any real boost....
|
| All times are GMT -5. The time now is 01:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands