Late night HMT intercooler action
I'm not sure how many of you are following my thread about turbocharging my cousin's Accord:
https://www.homemadeturbo.com/forum/...hp?topic=55261 But last night/this morning (1 A.M.) Chris and I were trying to figure out how the heck we were going to do the piping from the J-pipe to the existing intercooler piping.. http://img490.imageshack.us/img490/7614/pict00141ml.jpg The J-pipe was big and pointing in the opposite direction of what we needed :l Well, I brainstormed, and after a short run to Home Depot we got what we needed: http://img482.imageshack.us/img482/2181/pict00010qi.jpg http://img482.imageshack.us/img482/7551/pict00024mo.jpg http://img135.imageshack.us/img135/1849/pict00062bw.jpg Chris chopped down the J-pipe to nothing, I put a HD bend on it, then used another part of the j-pipe to bend some more, used part of the turbo rubber piping from the Probe Turbo to connect that to even another piece of the j-pipe, then used a transition coupler from that small pipe to the 2.5" pipe, then that 2.5" pipe connects to the rest :8 :y Finally got done right around 3 A.M. after all the parts running ;D Also, today after we get the seals we're installing the 450's (Going Frank style... "just press those bitches in") and the BOV, however the BOV piping is 2 1/4 and the regular piping is 2 1/2, and we can't find any home depot transition couplers :S Also John Kerr (j-k-tuning) is going to chip the p06, so we might have this thang running by Friday ;D |
Re: Late night HMT intercooler action
Looks good. You guys seem to have done a VERY clean job on it. Hope it runs well for you. HA, my Dad walks by: "Wow, all THEIR stuff is all crome and shiny." LOL. He's a ricer. :P I DO like that manifold though.
JP |
Re: Late night HMT intercooler action
Other than the serious amount of rust and the homo painted engine parts, it looks good. :l I predict busted couplers in your future though....
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re: Late night HMT intercooler action
your going to melt right through there, the temps coming from that turbo will eat that rubber piece of ---- alive. other than that, it looks good.
|
Re: Late night HMT intercooler action
what manifold is that? Looks hot
|
Re: Late night HMT intercooler action
That butyl rubber elbow won't hold the boost, unless you're only boosting a punk-ass 6 or 8 psi....
Lots of guys have tried, all have failed. |
Re: Late night HMT intercooler action
Originally Posted by mike saunders
That butyl rubber elbow won't hold the boost, unless you're only boosting a punk-ass 6 or 8 psi....
Lots of guys have tried, all have failed. |
Re: Late night HMT intercooler action
Originally Posted by accordepicenter
what manifold is that? Looks hot
turbo is WAY undersized |
Re: Late night HMT intercooler action
ehh i didnt recognize it. I agree that turbo is mad small, prolly be running out of air by 5250 on 9 psi
|
Re: Late night HMT intercooler action
get some silicone cuoplers from lsdmotorsports .. that couple will eventually pop.
|
All times are GMT -5. The time now is 10:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands