|
Re: HMT midwest reppin SOHC BUILD pics nigga
looks good man! go Midwest!
|
Re: HMT midwest reppin SOHC BUILD pics nigga
can that block handle 18 psi i really dont know i guess we will see it will eather go or blow ;D |
Re: HMT midwest reppin SOHC BUILD pics nigga
full race put 470 whp with stock sleeves at 22 psi on a gt35r ... im sure this can handle 16-18 with a uber tune and some c-16
|
Re: HMT midwest reppin SOHC BUILD pics nigga
blah blah blah.... im a moron, 450hp on a stock sleeve sohc when beau barely got about that on a filled b16... if you think ur gonna hit it then great, but til you do dont ------ argue about something you havent hit nor know what ur gonna hit. you have high hopes which leads to a hard letdown... let ur car do its talking... that way you dont feel stupid afterwards. shut people up with the numbers not ur mouth. or else im going to laugh harder then i already am. you wouldn't be getting the responses your getting if you only said "im aiming for 250 but we'll see what it hits" then everyone else woulda said something like "im sure you'll get more, but we'll see".... ur like buttsex, lets see if your a let down just like him
|
Re: HMT midwest reppin SOHC BUILD pics nigga
Originally Posted by ososlohatch
full race put 470 whp with stock sleeves at 22 psi on a gt35r ... im sure this can handle 16-18 with a uber tune and some c-16
|
Re: HMT midwest reppin SOHC BUILD pics nigga
Originally Posted by TurbodEG
werd
Is this the one ur talkin about? http://www.full-race.com/prototype/pinks/pinks2.jpg http://www.full-race.com/prototype/pinks/pinks3.jpg cuz they lost there car on the show to this car... http://img363.imageshack.us/img363/7607/imga19717al.jpg http://img363.imageshack.us/img363/5371/imga19563gu.jpg http://img363.imageshack.us/img363/8443/imga19556nu.jpg and another pic of the hatch after speedmachine beat full-race and jus so you know, it wasn't 22psi, it was 30, and jus so you know it wasn't a gt35r, it was a t3/t4 off the shelf. yeah the sohc made its power. n they say the sohc sleeves can handle more then everyone says. read his write up... ill leave ur car alone til its on the dyno, no point in sayin it'll do this or it'll do that... lets jus see what it does. but i still think .10 over on the stock sleeves, it wont take some hardcore abuse for long. |
Re: HMT midwest reppin SOHC BUILD pics nigga
why are you say'n i dont know wtf im talking about when all you keep sayn is look at other peoples and well "I THINK" i could care less what you think .. if this thing hit 225 ill be happy were not try'n to build a street monseter here ... if you would like i can prove you wrong and send you several links of d's with 300 whp on stock sleeve's .. im sure that would make you sallow your trash talking ... you know damn well there are hundreds if not 1,000 who have hit 300 ish on stock sleeve's ... note no one said for sure hit 300 we said it'd be nice if it hit 300ish im thinking more like 275 but will have to see
|
Re: HMT midwest reppin SOHC BUILD pics nigga
Originally Posted by turboDA6
who said it? noone did, that is why i said "i didn't see anywhere that the block was sleeved". you definatly wont hit 300, guaranteed. pistons n rods or not, .10 over n more boost with a lil turbo wont do it. didn't you see what happened to the guy that was tryin to top bbka with his sohc turbo? 15psi it went boom with his stock sleeves. yours are even weaker but ill let ur motor do its talking. got it running today, breaking it in with out the turbo. so its a ------- turd right now. but everything went really smoth except when we started it it was running like ----. so i was just going to try to take it around the block and everytime i pushed on the gas it ------- bogged out and would almost die. so i thought for a bit and figured it out it was the map and tps plugs were switched around. but there was no check engine light that i thought was werd but i switched them then everything ran fine. drove it like 5 miles then changed the oil and drove it about 50-60 miles more. i'll keep you all up dated to the turbo install and dynoing. |
Re: HMT midwest reppin SOHC BUILD pics nigga
Good to hear.Nothing like firing a fresh built motor to see it run good. :6
|
Re: HMT midwest reppin SOHC BUILD pics nigga
How do the pistons sound compared to stock (slap when warm/cold)? Also, what piston to wall clearance did you use?
|
| All times are GMT -5. The time now is 12:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands