HMT midwest reppin SOHC BUILD pics nigga
 

https://www.homemadeturbo.com/forum/...?topic=50614.0
https://www.homemadeturbo.com/forum/...?topic=51440.0

this is how we started

95 civic coupe
d15b7 bottom end rebuilt blueprinted and balenced to 10,000
z6 head race ported and polished
port mached intake mani
stage 2 crower turbo cam
act 8 lb flywheel
act stage 2 clutch
95 del sol si tranny
greddy turbo manifold
t2 .48/.49 turbo off sunbird
force fab oil line kit
2' intercooler piping
saab intercooler
1g dsm blow off valve
2' down pipe
2 1/4' exhaust

and this is us building it

everything is still the same but the block is a z6 punched out .010

block:
http://img381.imageshack.us/img381/5...ewmotor9kl.jpg
http://img385.imageshack.us/img385/4...wmotor24wp.jpg
http://img236.imageshack.us/img236/3...wmotor31sn.jpg
http://img236.imageshack.us/img236/3...wmotor31sn.jpg
bearings:
http://img213.imageshack.us/img213/6...ewshit21yw.jpg
arp rod bolts:
http://img361.imageshack.us/img361/9...ewshit43uz.jpg
gaskets:
http://img399.imageshack.us/img399/7...ewshit53rr.jpg
pistons:
http://img374.imageshack.us/img374/4...ewshit77ya.jpg
http://img372.imageshack.us/img372/9...ewshit84bo.jpg
http://img372.imageshack.us/img372/8...ewshit99kq.jpg
rods:
http://img379.imageshack.us/img379/1...wshit104jx.jpg
http://img379.imageshack.us/img379/1...wshit104jx.jpg
http://img356.imageshack.us/img356/8...wshit125tx.jpg
http://img356.imageshack.us/img356/1...wshit136xj.jpg
block assembled:
http://img356.imageshack.us/img356/3763/newmotor6ud.jpg
http://img213.imageshack.us/img213/8...wmotor29dp.jpg
http://img483.imageshack.us/img483/9...wmotor37ye.jpg
http://img476.imageshack.us/img476/7...wmotor45ep.jpg
http://img380.imageshack.us/img380/3...wmotor51gz.jpg
http://img101.imageshack.us/img101/7...eandton0hv.jpg


so we are getting a new front mount and a .60/.63 hoping to run 18psi shooting for 300ish. but who knows we'll just have to run it and see what we get.........

Re: HMT midwest reppin SOHC BUILD pics nigga
 

MW represent!

Lookin good 8)

Re: HMT midwest reppin SOHC BUILD pics nigga
 

Good ----...keep the updates coming

Re: HMT midwest reppin SOHC BUILD pics nigga
 

you need a better mani, bigger turbo, even than the 60/63

looks good though.

Re: HMT midwest reppin SOHC BUILD pics nigga
 

2 1/4 exhaust ???

Re: HMT midwest reppin SOHC BUILD pics nigga
 

what rods are those

Re: HMT midwest reppin SOHC BUILD pics nigga
 

Tuner Toys. :y

Re: HMT midwest reppin SOHC BUILD pics nigga
 

Piping on cold side is only 2" too? Exhaust seems small too. :-\ Your build not mine. :y Looks GREAT though. I wanted to build a 300whp single. Good luck and keep us posted. ;) ;D


JP

Re: HMT midwest reppin SOHC BUILD pics nigga
 

were changing the whole setup: running a drag mani with a 60/63 getting rid of the fmu and running uber. 2 1/2 inch ic piping cca fmic turbo xs bov then going with a 3 inch d/p and 2 1/2 exhaust

Re: HMT midwest reppin SOHC BUILD pics nigga
 

i didn't see anywhere with the block being sleeved? nor posted or filled? 300whp i doubt. especially with that turbo.