Re:compression test gone wrong
 

don't do it that way, it got all fucked up when I tried that, JD weld got all over the place, it was a mess. Go to your hardware store and buy an easy out (reverse drill bit). thread the easyout in there really easily and back it out. Don't try to torque it too hard and definitely do not use any sort of power tools, the easy out will break. Mine came out relatively easily. Good luck.

Re:compression test gone wrong
 

so you JB welded a spark plug into you head?

Re:compression test gone wrong
 

your confused.

Re:compression test gone wrong
 

Re:compression test gone wrong
 

I did the exact ------- thing before.

Re:compression test gone wrong
 

I remember the first time I did a compression test and almost got the tester stuck. Had the hose coiled like a pasta noodle before it finally broke free. Since then I always lube it up and don't go in very tight :P

Re:compression test gone wrong
 

i got a big ass screw driver and it fit into it and i turned it.

Re:compression test gone wrong
 

anyone who fucks up on a compression test is ------- retarded. ::)

Re:compression test gone wrong
 

mine was a plastic corc that i screwed into where the spark plug went. its werd. its like one of thise corks for wine bottles. then the damn l;ever to releave pressure got stuck. so i plugged the hole with a pencil and cranked. POP, flew right out.but this one was all weird and ----. everything was in german.

Re:compression test gone wrong
 

I used VERY long needle nose plyers and turned that fucker back out, But I didn't put the spark plug back in and tighten it