Another newb goes turbo
#1
Another newb goes turbo
Alright we start off with the basics:
D16Y7 with 115000 miles
Garrett TA0301 from a mercedes turbo diesel
310 RC injectors
stealthmode lines
knock off greddy RS bov
obd2 to obb1 conversion w/ P06 ecu from xenocron
ebay front mount intake piping
and custom made 2.5 downpipe half ssautoass/half magnaflow exhaust pipe
1st we have a stock 4 door
then we have certain various parts:
turbo/manifold
injectors
downpipe
intercooler
oil line kit
blow off valve
then after that we take off the perfectly fuctionin ac system
we tap the oil pan
we install the turbo
we connect the oil feed line
we connect the oil return line
install the downpipe
mount the intercooler with wire clothes hangers
install the cold pipe
install the hot pipe
install the bov (check out the JB weld on this beast)
wire up the injectors
---- boring out the seals squeeze the ******* in there
then we plug up the p06 with uberdata
install some gauges
then were done
i have to thank my best friend for my sucess
oh yea, i also got to thank all the people in my garage eatin while i was workin
thanks for all your help you guy, just kiddin'
when it comes down to it this isnt bad for a 18 year old kid thats in high school working
at taco bell.
D16Y7 with 115000 miles
Garrett TA0301 from a mercedes turbo diesel
310 RC injectors
stealthmode lines
knock off greddy RS bov
obd2 to obb1 conversion w/ P06 ecu from xenocron
ebay front mount intake piping
and custom made 2.5 downpipe half ssautoass/half magnaflow exhaust pipe
1st we have a stock 4 door
then we have certain various parts:
turbo/manifold
injectors
downpipe
intercooler
oil line kit
blow off valve
then after that we take off the perfectly fuctionin ac system
we tap the oil pan
we install the turbo
we connect the oil feed line
we connect the oil return line
install the downpipe
mount the intercooler with wire clothes hangers
install the cold pipe
install the hot pipe
install the bov (check out the JB weld on this beast)
wire up the injectors
---- boring out the seals squeeze the ******* in there
then we plug up the p06 with uberdata
install some gauges
then were done
i have to thank my best friend for my sucess
oh yea, i also got to thank all the people in my garage eatin while i was workin
thanks for all your help you guy, just kiddin'
when it comes down to it this isnt bad for a 18 year old kid thats in high school working
at taco bell.
#8
Re: Another newb goes turbo
the manifold is not ssautochrome or xspower made. i got it from fatboygarage in sol cal. i compared my manifold to a ssautocrap one and mine is heavier better welds and uses thicker gauge metal. i know my ---- is not ssautochrome i had one side by side with mine and mine is way better, 5lbs heavier, using thicker metal, welds are penetrated better and doesnt dent when you drop it on the floor(on accident).