HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   Another newb goes turbo (https://www.homemadeturbo.com/general-discussion-6/another-newb-goes-turbo-60745/)

overdrivn 05-02-2006 11:35 PM

Another newb goes turbo
 
23 Attachment(s)
Alright we start off with the basics:

D16Y7 with 115000 miles
Garrett TA0301 from a mercedes turbo diesel
310 RC injectors
stealthmode lines
knock off greddy RS bov
obd2 to obb1 conversion w/ P06 ecu from xenocron
ebay front mount intake piping
and custom made 2.5 downpipe half ssautoass/half magnaflow exhaust pipe

1st we have a stock 4 door
Attachment 34553
then we have certain various parts:

turbo/manifold
Attachment 34554
injectors
Attachment 34555
downpipe
Attachment 34556
intercooler
Attachment 34557
oil line kit
Attachment 34558
blow off valve
Attachment 34559
then after that we take off the perfectly fuctionin ac system
Attachment 34560
we tap the oil pan
http://i12.photobucket.com/albums/a2...o/DSC02142.jpg
we install the turbo
Attachment 34561
we connect the oil feed line
Attachment 34562
we connect the oil return line
Attachment 34563
install the downpipe
Attachment 34564
mount the intercooler with wire clothes hangers
Attachment 34565
install the cold pipe
Attachment 34566
install the hot pipe
Attachment 34567
install the bov (check out the JB weld on this beast)
http://i12.photobucket.com/albums/a2...o/DSC02177.jpg
wire up the injectors
Attachment 34568
---- boring out the seals squeeze the fuckers in there
Attachment 34569
then we plug up the p06 with uberdata
Attachment 34570
install some gauges
Attachment 34571
then were done
Attachment 34572
i have to thank my best friend for my sucess
Attachment 34573
oh yea, i also got to thank all the people in my garage eatin while i was workin
thanks for all your help you guy, just kiddin'
Attachment 34574
when it comes down to it this isnt bad for a 18 year old kid thats in high school working
at taco bell.
Attachment 34572

Reddy 05-02-2006 11:36 PM

Re: Another newb goes turbo
 
In for manifold comments

idiot-stick 05-02-2006 11:44 PM

Re: Another newb goes turbo
 
In for Taco Bell induced diarrhea

Lose the hood

jacob_kohler 05-02-2006 11:47 PM

Re: Another newb goes turbo
 
Nice install, car looks pretty tight to.

RlinR 05-02-2006 11:48 PM

Re: Another newb goes turbo
 
James???

brick1234 05-02-2006 11:50 PM

Re: Another newb goes turbo
 
nice job hows it run, and loose the body kit.

Jmunk 05-02-2006 11:50 PM

Re: Another newb goes turbo
 
Nice mexican weld, I mean JB weld. Nice setup.

overdrivn 05-03-2006 12:01 AM

Re: Another newb goes turbo
 
the manifold is not ssautochrome or xspower made. i got it from fatboygarage in sol cal. i compared my manifold to a ssautocrap one and mine is heavier better welds and uses thicker gauge metal. i know my ---- is not ssautochrome i had one side by side with mine and mine is way better, 5lbs heavier, using thicker metal, welds are penetrated better and doesnt dent when you drop it on the floor(on accident).

con 05-03-2006 12:59 AM

Re: Another newb goes turbo
 
ssautochrome for sure ;)

Dibble 05-03-2006 01:38 AM

Re: Another newb goes turbo
 
Hey, atleast your turbo. Who cares how you get there. :4


All times are GMT -5. The time now is 11:55 AM.


© 2024 MH Sub I, LLC dba Internet Brands