4g63t_EGMonster

do that and tell me how it goes!

Toysrme

4-6" infront of the tb. Spray upstream, or downstream, NOT AT A WALL.
Use ethyl alcohol (Methanol is bad for aluminum, isoproply alcohol will actuall completely combust (ethyl/methyl will NOT) to burn, wasting oxygen & decrease power compaired to the same amount of fuel burned).
A solenoid you can turn on/off with the pump is the best way, next to that is a check valve is the ebst way to ensure water is always in the line. (They can not leak)
It's not "10-25%" water to gasoline. It's "15-25, or greater water to MIXTURE weight". Mixture being the total of both the water injected, and the fuel.


Aside from that... Drink some milk, buy a water pump, and some type of nozzle/atomizer to use as a sprayer, some tubing, wiring, a boost pressure switch, a relay, and a check valve.
That stupid SOB aint nothing but a homebuilt scam. It's worth *maybe* $55, 39.99 of that is the pump from harbor freight.


I hate to down becool after i got a killer deal on a lot of boost pressure switches from him...


But I think that's a harbor freight pump too.