HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   WATER INJECTION Alcohol ? Few ?'s (https://www.homemadeturbo.com/forced-induction-7/water-injection-alcohol-few-s-60181/)

peenmysoup 04-24-2006 07:44 PM

WATER INJECTION Alcohol ? Few ?'s
 
I have been searching about this latley, and i was wondering if i chould use this as kinda like a use only when im street racing kinda thing, like when i know im about to do a race, i can spray it while racing, and where does the nozzle hook up, to the intercooler pipe between the intercooler and the throttle bodie. Want to run 10 pounds and 12 evently. I herd that it helps with no dentenation and you can run more boost safely. Here is one for sale, does this look ok or is it a junk kit

http://cgi.ebay.com/ebaymotors/WATER...spagenameZWDVW

And as far as tunning do i have to tune for this or can it be used whenever i feel kinda like nitrous with a push of a button. And is it hard to get ahold of the type of alcohol you need, thanks your time.

Reddy 04-24-2006 07:45 PM

Re: WATER INJECTION Alcohol ? Few ?'s
 
there was a 7 page thread on water injection, search.

Anubis_4_99 04-24-2006 07:51 PM

Re: WATER INJECTION Alcohol ? Few ?'s
 
i used it in my turbo 510 with 12:1 compression and liked it ;D helped keep detenation away and keep the motor cool to a point, i used a 50/50 blend of water and alcohol and had it activate at 4 pounds of boost

peenmysoup 04-24-2006 08:14 PM

Re: WATER INJECTION Alcohol ? Few ?'s
 
i read the whole thread, the only thing i dont get is what do you need to make sure there is always water waiting if you dont use the gravity system. i want to mount the resvior in the back of my hatch,

Anubis_4_99 04-24-2006 08:37 PM

Re: WATER INJECTION Alcohol ? Few ?'s
 

Originally Posted by peenmysoup
i read the whole thread, the only thing i dont get is what do you need to make sure there is always water waiting if you dont use the gravity system. i want to mount the resvior in the back of my hatch,

a motor with a pickup line :l i used the window sprayer bottle and motor for mine

peenmysoup 04-24-2006 08:50 PM

Re: WATER INJECTION Alcohol ? Few ?'s
 
can you install the nozzle inbetween the intercooler and the throttle body or does it have to be pre turbo intake

Anubis_4_99 04-24-2006 09:33 PM

Re: WATER INJECTION Alcohol ? Few ?'s
 

Originally Posted by peenmysoup
can you install the nozzle inbetween the intercooler and the throttle body or does it have to be pre turbo intake

mine was carb'd, so my nozzle was sitting in my carburator, i havent done it on a EFI setup yet, but i'd imagine you'd want to put it semi close to the TB

peenmysoup 04-24-2006 10:04 PM

Re: WATER INJECTION Alcohol ? Few ?'s
 
eight on, im gonna go for it

Anubis_4_99 04-24-2006 10:12 PM

Re: WATER INJECTION Alcohol ? Few ?'s
 

Originally Posted by peenmysoup
eight on, im gonna go for it

make sure your jet is small enough so you dont hydrolock the motor, that would be bad :1

peenmysoup 04-24-2006 10:40 PM

Re: WATER INJECTION Alcohol ? Few ?'s
 
well im just gonna buy the kit for the link i posted, then buy a 2 quart resv, and but the resv in the back of the hatch.


All times are GMT -5. The time now is 02:53 AM.


© 2024 MH Sub I, LLC dba Internet Brands