Forced Induction Custom FI Setup Questions

Wastegate springs...cdm springs

Thread Tools
 
Search this Thread
 
Old 04-07-2007, 04:47 AM
  #11  
3.0 BAR
 
imburne's Avatar
 
Join Date: Jun 2006
Posts: 3,256
Default Re: Wastegate springs...cdm springs

Havent you learned with a mbc yet? Keep that eye on the boost gauge *****. If it goes past what you thought or wanted then let off. When I was using the pain in the *** greddy profec b-spec II I had to do the same thing till I got it set just right.
imburne is offline  
Old 04-07-2007, 07:19 AM
  #12  
1.0 BAR
 
ChevyIIMan's Avatar
 
Join Date: Nov 2006
Posts: 277
Default Re: Wastegate springs...cdm springs

My XS power Tial Knockoff shipped with a brown spring in the WG and a Yellow one in the box. The yellow one is a 3.6 psi spring. The Brown one is noticeably stiffer and I am unsure of what psi it is.
ChevyIIMan is offline  
Old 04-07-2007, 10:01 AM
  #13  
3.0 BAR
Thread Starter
 
Slo_crx1's Avatar
 
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Default Re: Wastegate springs...cdm springs

Originally Posted by ChevyIIMan
My XS power Tial Knockoff shipped with a brown spring in the WG and a Yellow one in the box. The yellow one is a 3.6 psi spring. The Brown one is noticeably stiffer and I am unsure of what psi it is.
That's the problem...they shipped a yellow spring with it, but the one that's in it hits 3.63 also. WTF did they do...ship me 2 of the same springs? :P
Slo_crx1 is offline  
Old 04-07-2007, 11:57 AM
  #14  
3.0 BAR
 
imburne's Avatar
 
Join Date: Jun 2006
Posts: 3,256
Default Re: Wastegate springs...cdm springs

If they are two different sizes the put them together. Play with it for a second and you will see what I mean.
imburne is offline  
Old 04-08-2007, 12:00 AM
  #15  
1.0 BAR
 
ChevyIIMan's Avatar
 
Join Date: Nov 2006
Posts: 277
Default Re: Wastegate springs...cdm springs

I dont think they know what size is in the WG I think they just toss in whatever spring you ordered to make sure you get the right one. Why dont you just use a MBC
ChevyIIMan is offline  
Old 04-08-2007, 10:12 AM
  #16  
3.0 BAR
Thread Starter
 
Slo_crx1's Avatar
 
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Default Re: Wastegate springs...cdm springs

Originally Posted by ChevyIIMan
I dont think they know what size is in the WG I think they just toss in whatever spring you ordered to make sure you get the right one. Why dont you just use a MBC
That's probably what they did, and I probably now have 2 yellow 3.63psi springs. I have been cranking up on the mbc...need to crank it more
Slo_crx1 is offline  
Old 04-08-2007, 03:18 PM
  #17  
1.5 BAR
 
G2turbo_terror's Avatar
 
Join Date: Jul 2003
Location: Minnesota
Posts: 1,122
Default Re: Wastegate springs...cdm springs

Do what WTF said by using air pressure to test it.

Hook up a blowgun/nozzle to the air compressor, from there have rubber hose going to the wastegate, just 'T' in you boost guage and put it right next the the wastegate, slowly push/release air and watch them both.
G2turbo_terror is offline  
Old 04-08-2007, 04:29 PM
  #18  
WTF
3.0 BAR
 
WTF's Avatar
 
Join Date: Jan 2006
Posts: 2,057
Default Re: Wastegate springs...cdm springs

ya i think that would work good if you have a way to control the air without letting to much out at once, i never got that far i said ---- it and ran it anyways
WTF is offline  
Old 04-08-2007, 09:29 PM
  #19  
3.0 BAR
Thread Starter
 
Slo_crx1's Avatar
 
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Default Re: Wastegate springs...cdm springs

I'm not even going to bother. I fixed my issue with a nice spring loaded one-way pcv valve (some solid metal peice too, very nice ) and now I can crank on it a bit more without having the increased vaccum load open my wastegate all the way at idle and part throttle. I took it to 8psi today, and I'm happy with it so I'll probably leave it at that. The car is going to do more auto-x action than anything these days, so moster amounts of power aren't really needed. Besides, it still makes my '04 wrx seem like a neon off the line and up through 4th gear
Slo_crx1 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
marcj
Wanted
7
09-11-2008 07:33 PM
labatt50
Wanted
0
08-12-2008 03:42 PM
WTF
Forced Induction
13
06-22-2007 01:12 PM
WTF
Forced Induction
11
05-26-2007 02:06 AM
greenbomber
Wanted
0
12-21-2006 11:29 PM



Quick Reply: Wastegate springs...cdm springs



All times are GMT -5. The time now is 07:35 PM.