wastegate question
#21
Re: wastegate question
putting it to the manifold will be fine, if you have enough open vaccum sources. I wouldnt let it share a small line with something else thoug. That's why I got the vaccummanifold....to split the brake booster line and give me a large source to share on.
#22
Re: wastegate question
Originally Posted by B16CRXT
yep, you can do it this way too. But for accurate boost control, you should use a boost reference after teh intercooler. It's not entirely necesary, but you could be wanting to run 10psi, and only be running 8 or 9 once it gets past teh intercooler.
Hmm, I understand what you're saying now. I didn't know you lost a psi or 2 through the IC like that. My gauge is off by about 2psi anyway from comparing it to the dyno. I might re-route my lines straight up to the empty source on the intake mani.
JP
Thread
Thread Starter
Forum
Replies
Last Post
happyabortion
Forced Induction
11
03-08-2007 12:42 PM
djay86
Forced Induction
10
11-26-2005 03:56 PM