Forced Induction Custom FI Setup Questions

vaccum line questions

Old Nov 9, 2003 | 08:23 PM
  #1  
poundedyourmom's Avatar
Thread Starter
0.5 BAR
 
Joined: Aug 2003
Posts: 50
Default vaccum line questions

would it be ok for me to tee off my fuel regulator for my boost gauge and my blow off valve ill be using a 1g dsm thanks


Old Nov 9, 2003 | 09:21 PM
  #2  
Paperchase013's Avatar
1.5 BAR
 
Joined: Nov 2003
Posts: 908
Default Re:vaccum line questions

i have my regulator, fmu, bov, wastegate, & boost gauge on the same line, NO PROBLEMS HERE!!
Old Nov 11, 2003 | 10:23 PM
  #3  
ShadowRex's Avatar
1.0 BAR
 
Joined: May 2003
Posts: 517
Default Re:vaccum line questions

Originally Posted by Paperchaser013
i have my regulator, fmu, bov, wastegate, & boost gauge on the same line, NO PROBLEMS HERE!!
Yet.

You should not run more than 1 per line. especialy on a fpr signal.
Old Nov 11, 2003 | 10:24 PM
  #4  
poundedyourmom's Avatar
Thread Starter
0.5 BAR
 
Joined: Aug 2003
Posts: 50
Default Re:vaccum line questions

so where should i hook the boost gauge through?
Old Nov 12, 2003 | 06:25 AM
  #5  
Paperchase013's Avatar
1.5 BAR
 
Joined: Nov 2003
Posts: 908
Default Re:vaccum line questions

my motor only has one vacuum sorce, so i have no choice, it seems to be just fine though i always get 20 in/hg on my vac gauge no matter how many things i have on the line.
Old Nov 12, 2003 | 11:51 PM
  #6  
i2slowLS's Avatar
0.0 BAR
 
Joined: Nov 2003
Posts: 1
Default Re:vaccum line questions

i am going to put a turbo on my ls motor.
but how do i get around my m.a.p sensor?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
i3lazedx
Forced Induction
4
Jan 31, 2005 11:22 AM
grittyspeed
Hybrid/Tech
6
Dec 24, 2004 08:15 PM
Turbodelsolman
Forced Induction
2
Jan 1, 2003 07:28 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:26 PM.