Turbo ZC
06-05-2007, 01:42 AM
#1
0.5 BAR
Thread Starter
Join Date: Dec 2006
Posts: 144
Turbo ZC
So i just go my jd Dohc ZC back into time, i had it turboed with stock injectors and no management or FPR or wideband, would anything of these help me from the time jumpin again , i had 450cc injectors, but it was giving too much fuel. BTW this is in a 89 civic hactch
06-05-2007, 12:05 PM
#4
1.5 BAR
Join Date: Jan 2006
Posts: 865
Re: Turbo ZC
you can keep the 450's and have someone burn you a basemap to run those injectors for the time being.
but no, you'll blow your junk up if you keep trying to run your car with no management
Do alittle research on how things work. ie; turbo's, fuel management, life.....
but no, you'll blow your junk up if you keep trying to run your car with no management
Do alittle research on how things work. ie; turbo's, fuel management, life.....
06-05-2007, 01:23 PM
#6
0.0 BAR
Join Date: Dec 2003
Posts: 0
Re: Turbo ZC
I have to be an ------- because idiots like you need to learn to READ and UNDERSTAND stuff before they start slapping ---- together. Hmm, I wonder why 450's were giving you too much fuel when you are putting larger injectors in a car with no modifications to how that fuel goes in there (ie ECU?). I can't believe you even TRIED to run the car with nothing, ----, theres more than enough information on this site to know the necessities of a turbo setup. That is why you should grab a rope, nog.
06-05-2007, 06:50 PM
#8
3.0 BAR
Join Date: Jun 2005
Posts: 2,753
Re: Turbo ZC
http://cgi.ebay.com/ebaymotors/SAFC-...spagenameZWDVW
at least. go read the stickies in engine managment before you blow your ---- up.
at least. go read the stickies in engine managment before you blow your ---- up.
06-08-2007, 07:19 PM
#9
3.0 BAR
Join Date: Apr 2006
Posts: 3,015
Re: Turbo ZC
you probably jumped time because of slack in the belt.. is this the same zc your trying to sell for $350 in the FS section?? if it is i will give you $100 for since its probably half blown since you tried to run it with no management
06-08-2007, 07:58 PM
#10
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: Turbo ZC
Originally Posted by sikcrx89
you probably jumped time because of slack in the belt.. is this the same zc your trying to sell for $350 in the FS section?? if it is i will give you $100 for since its probably half blown since you tried to run it with no management
no kidding
I forgot the motor has 7 bent valves and a hole in a piston
