HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Turbo ZC (https://www.homemadeturbo.com/forced-induction-7/turbo-zc-78757/)

SpoolinZc 06-05-2007 01:42 AM

Turbo ZC
 
So i just go my jd Dohc ZC back into time, i had it turboed with stock injectors and no management or FPR or wideband, would anything of these help me from the time jumpin again , i had 450cc injectors, but it was giving too much fuel. BTW this is in a 89 civic hactch

HondaTuner 06-05-2007 02:03 AM

Re: Turbo ZC
 
http://img118.imageshack.us/img118/7...oosemedbq6.jpg

Grab one. ::)

SpoolinZc 06-05-2007 11:31 AM

Re: Turbo ZC
 
why do you have to be a total -------, why cant you just help me with the problem i am having with my turbo zc?

D15Bastard 06-05-2007 12:05 PM

Re: Turbo ZC
 
you can keep the 450's and have someone burn you a basemap to run those injectors for the time being.

but no, you'll blow your junk up if you keep trying to run your car with no management

Do alittle research on how things work. ie; turbo's, fuel management, life.....

Shanksta 06-05-2007 12:07 PM

Re: Turbo ZC
 
do you relize that if the factory took your apporach at building cars then you would have
no ecu!! congrats

HondaTuner 06-05-2007 01:23 PM

Re: Turbo ZC
 
I have to be an ------- because idiots like you need to learn to READ and UNDERSTAND stuff before they start slapping ---- together. Hmm, I wonder why 450's were giving you too much fuel when you are putting larger injectors in a car with no modifications to how that fuel goes in there (ie ECU?). I can't believe you even TRIED to run the car with nothing, ----, theres more than enough information on this site to know the necessities of a turbo setup. That is why you should grab a rope, nog.

2poor2tune 06-05-2007 06:45 PM

Re: Turbo ZC
 
atleast get a vafc. at least.

RotaryGeek 06-05-2007 06:50 PM

Re: Turbo ZC
 
http://cgi.ebay.com/ebaymotors/SAFC-...spagenameZWDVW
at least. go read the stickies in engine managment before you blow your ---- up.

sikcrx89 06-08-2007 07:19 PM

Re: Turbo ZC
 
you probably jumped time because of slack in the belt.. is this the same zc your trying to sell for $350 in the FS section?? if it is i will give you $100 for since its probably half blown since you tried to run it with no management

Guy-Fast 06-08-2007 07:58 PM

Re: Turbo ZC
 

Originally Posted by sikcrx89
you probably jumped time because of slack in the belt.. is this the same zc your trying to sell for $350 in the FS section?? if it is i will give you $100 for since its probably half blown since you tried to run it with no management



no kidding



I forgot the motor has 7 bent valves and a hole in a piston


All times are GMT -5. The time now is 01:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands