WHICH TURBO WILL SUIT MY REQUIREMENTS?
#11
Re: WHICH TURBO WILL SUIT MY REQUIREMENTS?
Originally Posted by boosted_b16
a t3 super 60 will work good, even a straight .48/.60 t3 will work, both will spool quick and both can hold 10 psi 'till 8,000 rpm, the super 60 is much better though, and the super 60 will easily make 260 hp at 10 psi...
Thanks Again
#12
Re: WHICH TURBO WILL SUIT MY REQUIREMENTS?
damn with 3400 i could have my car running high 9's. with that amount of money you should be able to let your mind wonder in many diferent dirrections. on a 1 bar spring your looking at 14.7 psi when including fmic and couplings it ussually drops 1 psi so you should be pretty close. if you wanted 10-12 psi you should have gone with a lower spring and tunred up the mbc or ebc.
#14
Re: WHICH TURBO WILL SUIT MY REQUIREMENTS?
Originally Posted by 4g63t_EGMonster
damn with 3400 i could have my car running high 9's. with that amount of money you should be able to let your mind wonder in many diferent dirrections. on a 1 bar spring your looking at 14.7 psi when including fmic and couplings it ussually drops 1 psi so you should be pretty close. if you wanted 10-12 psi you should have gone with a lower spring and tunred up the mbc or ebc.
#15
Re: WHICH TURBO WILL SUIT MY REQUIREMENTS?
Originally Posted by hackish
I tell all my customers the same thing - depends on what you want to spend.
If you have lots of coin then a disco potato would be a good choice. They spool a lot quicker than the T series. Can`t rebuild them if they break.
I`ve done lots of B16`s in your performance range with T3/T04E 54 trim and stage 3 0.63AR turbine. Personally I find the stage 3 wheel is a little laggy for a B16 but I`m not 100% sure you will make your horsepower targets at that boost level with a straight T3 wheel.
-Michael
If you have lots of coin then a disco potato would be a good choice. They spool a lot quicker than the T series. Can`t rebuild them if they break.
I`ve done lots of B16`s in your performance range with T3/T04E 54 trim and stage 3 0.63AR turbine. Personally I find the stage 3 wheel is a little laggy for a B16 but I`m not 100% sure you will make your horsepower targets at that boost level with a straight T3 wheel.
-Michael
Thread
Thread Starter
Forum
Replies
Last Post
RotaryGeek
Forced Induction
30
10-26-2006 04:06 PM
crx2fast
General Discussion
0
10-18-2006 09:14 AM