Turbo Size
09-23-2005, 11:25 AM
#1
3.0 BAR
Thread Starter
Join Date: Sep 2003
Posts: 3,751
Turbo Size
Turbonetics T3/T04E 57 trim .63
I'm looking at getting this from a guy in the Classified but wondering if it's going to be to big and laggy for the ZC. It's going to be used on my buildup. Looking for 320whp. I have plans for a Delta re-grind cams to get more air flow throught the motor, and maybe (starting to doubt) a minor P&P. I was going to go with my .60/.63, but turns out the wheels are shot, so I'm lloking for other options
I'm looking at getting this from a guy in the Classified but wondering if it's going to be to big and laggy for the ZC. It's going to be used on my buildup. Looking for 320whp. I have plans for a Delta re-grind cams to get more air flow throught the motor, and maybe (starting to doubt) a minor P&P. I was going to go with my .60/.63, but turns out the wheels are shot, so I'm lloking for other options
09-24-2005, 08:39 PM
#3
Administrator
Join Date: Dec 2002
Posts: 13,991
Re: Turbo Size
If you can find some decent pistons that wont make your ZC super low compression that turbo will work great, it should spool up too great with some nice regrinds. I've been boosting the ---- out of my milding built ZC lately and its pretty laggy with the 7.8c/r 
09-24-2005, 11:43 PM
#4
3.0 BAR
Thread Starter
Join Date: Sep 2003
Posts: 3,751
Re: Turbo Size
Well, I just won a rebuilt .60/.63 Nissan on Ebay. I was missing parts (nothing crutial) that I have from the one that in my shop. That is what I'm going with. I can always upgrade a housing if it's insuffiecient.
Thread
Thread Starter
Forum
Replies
Last Post
