Turbo Size
 

Turbonetics T3/T04E 57 trim .63

I'm looking at getting this from a guy in the Classified but wondering if it's going to be to big and laggy for the ZC. It's going to be used on my buildup. Looking for 320whp. I have plans for a Delta re-grind cams to get more air flow throught the motor, and maybe (starting to doubt) a minor P&P. I was going to go with my .60/.63, but turns out the wheels are shot, so I'm lloking for other options

Re: Turbo Size
 

Its a bit laggy but strong mid to top end pull.

Re: Turbo Size
 

If you can find some decent pistons that wont make your ZC super low compression that turbo will work great, it should spool up too great with some nice regrinds. I've been boosting the ---- out of my milding built ZC lately and its pretty laggy with the 7.8c/r :-\

Re: Turbo Size
 

Well, I just won a rebuilt .60/.63 Nissan on Ebay. I was missing parts (nothing crutial) that I have from the one that in my shop. That is what I'm going with. I can always upgrade a housing if it's insuffiecient.

Re: Turbo Size
 

For a ZC I wouldn't consider that laggy at all.

Re: Turbo Size
 

Well I'm shotting to keep the 9:1 to 9.5:1 CR Range. Spooling shouldn't be bad with the .60/.63 I got.