turbo setup
06-02-2004, 07:46 PM
#1
0.0 BAR
Thread Starter
Join Date: Jun 2004
Posts: 12
turbo setup
just starting with this turbo stuff can anyone help me with info on turbo charging my delsol.Got a few questions and need some one that knows enough to give me some answers. Im pretty sure theres a few of you out there so let me know some thing.
06-02-2004, 07:49 PM
#3
3.0 BAR
Join Date: Mar 2003
Posts: 5,282
Re:turbo setup
Kidding, what questions do you have? More than likely it can all be found throughout the furums and your answers will be here. Just read up a little and we won't hve a problem answering any specific questions you may have 
06-02-2004, 08:16 PM
#9
3.0 BAR
Join Date: Mar 2003
Posts: 5,282
Re:turbo setup
Well running an FMU is an inexpensive way to increase the ammount of fuel your stock injectors will put out. It's certainly not the best way and can be difficult to get good AFR's out of. But, using one is kind of dependent on how much power your looking to get out of the engine.
Are you looking to keep it fairly mild (5-6 psi on stock internals) or are you going to be building the engine up to handle quite a bit of boost? I personally wouldn't run an FMU unless I absolutely needed to, but it's all up to how much you expect out of this setup and how much you want to put into it.
Are you looking to keep it fairly mild (5-6 psi on stock internals) or are you going to be building the engine up to handle quite a bit of boost? I personally wouldn't run an FMU unless I absolutely needed to, but it's all up to how much you expect out of this setup and how much you want to put into it.
