Turbo installl, but car won't start
#11
Re: Turbo installl, but car won't start
try to replace it with a a/c relay or any 5 pin relay i believe. also use a test light to see if there is power before and AFTER the fuse box, if not after u know ur problem is in the box.eliminate ur options and it will be easier to find the problem.good luck to ya
#12
Re: Turbo installl, but car won't start
Originally Posted by Turbocharged Innovation
try to replace it with a a/c relay or any 5 pin relay i believe.
#13
Re: Turbo installl, but car won't start
Originally Posted by inthad
I checked the fuse. they are good.
my buddy say its the main relay. But how do i test if its bad?
my buddy say its the main relay. But how do i test if its bad?
#14
Re: Turbo installl, but car won't start
Originally Posted by inthad
I checked the fuse. they are good.
my buddy say its the main relay. But how do i test if its bad?
my buddy say its the main relay. But how do i test if its bad?
Just take it out and resolder all the pins. Worked for me on two cars with same problem.
#16
Re: Turbo installl, but car won't start
hey guys,
How do you check if the resistor box is still good? I need to check it.
If you slice the deadend clip and took out the resistor box and dsm injectors, and put on the stock injectors do you have to solider back the slice wires?
Or can I leave them cut and just make sure they don't touch each other but putting any end on them.
thanks
How do you check if the resistor box is still good? I need to check it.
If you slice the deadend clip and took out the resistor box and dsm injectors, and put on the stock injectors do you have to solider back the slice wires?
Or can I leave them cut and just make sure they don't touch each other but putting any end on them.
thanks
#17
Re: Turbo installl, but car won't start
If your not getting no fuel no spark It could be the ecu ground on the thermostat housing under the hood, or one of the two engine to chassis ground straps, when you cycle the key does the check engine light come on at all?
good luck
good luck
#18
Re: Turbo installl, but car won't start
Originally Posted by mdz1989
If your not getting no fuel no spark It could be the ecu ground on the thermostat housing under the hood, or one of the two engine to chassis ground straps, when you cycle the key does the check engine light come on at all?
good luck
good luck
#20
Re: Turbo installl, but car won't start
Originally Posted by inthad
Alright, it check
and there is no check engine light , I think its the main relay, but where is the relay located at on 99 civic si
help
and there is no check engine light , I think its the main relay, but where is the relay located at on 99 civic si
help
At least I think so.