Re: turbo i might get, wierd exhaust side
 

Even if it does I dont see whats so hard about it. balance shmalance, if it spins and doesnt sound like a squirrel got cought in there its good enough for me.

Re: turbo i might get, wierd exhaust side
 

i would keep the .48 but that is just me

Re: turbo i might get, wierd exhaust side
 

what are these dogbone lookin things towards the ouside of the compressor housing on the inside? mines missing one, i think where the stock wastegate was mounted to, not sure where or how to find one and if there differnt sizes
(not my turbo)
http://img440.imageshack.us/img440/615/imgp0985yb2.jpg

Re: turbo i might get, wierd exhaust side
 

Re: turbo i might get, wierd exhaust side
 

missing one compressor bracket? 2 out of 3 is ok. Just put large washers on the 2 bolts that have no bracket. It will keep the housing down just as good.
AT worst if you want the real bracket that belongs there, i have them in stock.
there'S 3 different types: T3, T04B and T04E. Your picture shows a T04B.

Re: turbo i might get, wierd exhaust side
 

That's exactly what I did. The internal wastegate acted as a bracket when bolted to the turbo, but when I had to mount it somewhere else to fit I just threw some washers on the 2 bolts where it used to be and never had any problems.

Re: turbo i might get, wierd exhaust side
 

why didnt i think of that.. thanks

Re: turbo i might get, wierd exhaust side
 

4/5 bolts on the o2 housing side snaped in the turbine housing, im guessing 1 or more might on the otherside when i try to rotate the center, what other turbine housings fit on this? any .63 turbine housing? other sizes? the lower the number the faster the spool right? i still dont understand these numbers totally, i've only used mitsu turbos

Re: turbo i might get, wierd exhaust side
 

I used the .48 housing on my b16, and it actually had a nice spool time, right around the 3500 mark. Also pulled right up to 8200...which was perfect for me. 8)

Re: turbo i might get, wierd exhaust side
 

so thats a smaller exhuast side to make it spool faster? i always thought the wheel inside wouldnt fit in a smaller one