Re: tuned, but low numbers???
Originally Posted by inthad
the tuner say its too much backpressure.... which is the cat that cause it.
also i don't have the dumptube running down the engine bay. most likely a combo of a clogged cat (if its clogged) and the dumptube exhausting hot exhaust right back into the compressor of the turbo. sounds like you have a fine tuner...fix your issues and bring it back to him. it's not his fault you brought him what you did. |
Re: tuned, but low numbers???
torque is through the roof for a b16
|
Re: tuned, but low numbers???
Originally Posted by xenocron
Just looking at the graph I would agree, that turbo supports more power than that, so its not like the turbo should be falling off its compressor map.
most likely a combo of a clogged cat (if its clogged) and the dumptube exhausting hot exhaust right back into the compressor of the turbo. sounds like you have a fine tuner...fix your issues and bring it back to him. it's not his fault you brought him what you did. |
Re: tuned, but low numbers???
is it intercooled?
toss the Catalytic converter.. run open dp, faggot >:D fix the dump tube check your cam timing any Check engine lights? you should be making 230-300 whp at a 10 psi tune on stock b16a |
Re: tuned, but low numbers???
Originally Posted by marcj
is it intercooled?
toss the Catalytic converter.. run open dp, faggot >:D fix the dump tube check your cam timing any Check engine lights? you should be making 230-300 whp at a 10 psi tune on stock b16a will toss the cat and run test pipe 3" will fix dump tube tuner checked the timing- seems good no check engine lights tuner say 230- sounds goods lol |
Re: tuned, but low numbers???
i got 235whp ass dyno ;)
|
Re: tuned, but low numbers???
wow look at the TQ failing.
get that hot exhaust gas out of your engine bay, remove the cat, and retry. |
Re: tuned, but low numbers???
lol, the torque curve is more like a torque mountain with cliffs on both sides.
|
Re: tuned, but low numbers???
yeah that torque is good at peak. the reason the power is so low is because the torque falls off so hard after peak. id like to see the timing tables on that one. the cat i most likely a large problem but you have other issues to lose almost 70ft/lbs between 5700ish-8K.
if you can get that thing to hold torque flat to redline it should make 240ish |
Re: tuned, but low numbers???
Just try open down pipe on the street, let it rip once or twice. If it pulls good on the top end, then the cat was your problem.
Definitely need dump tube though. |
All times are GMT -5. The time now is 01:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands