tuned, but low numbers???
b16 stock
t3/t04 garrett 50 trim. a/r .42/.50 38mm wastegate meutek manifold 2.5" to 3" dp w/ 3" exhaust - hi flow cat(magna flow) tune at 10 psi no dumptube 450cc dsm w/ resistor box look at the graph link--- http://viewmorepics.myspace.com/inde...ageID=12175133 the numbers are low for b16. what can be wrong? any body? the tuner say its too much backpressure.... which is the cat that cause it. also i don't have the dumptube running down the engine bay. |
Re: tuned, but low numbers???
wtf?
boost psi? you dont have the dumptube running where? those a/rs are small for a revving engine like a b16 in my opinion. there are alot of different things that could cause that. i dont know what the ---- they are, but i do know that it would be easier for people to answer if you had a more detailed description of what you are running. |
Re: tuned, but low numbers???
my bad, some updated infor
|
Re: tuned, but low numbers???
stock exhaust on it, right?
|
Re: tuned, but low numbers???
Originally Posted by highroller54
stock exhaust on it, right?
with high flow magna flow cat. |
Re: tuned, but low numbers???
Originally Posted by inthad
t3/t04 garrett 50 trim. a/r .42/.50
|
Re: tuned, but low numbers???
Create a dump tube and find a better tuner.
Make sure that the valves and the timing is adjusted properly too. |
Re: tuned, but low numbers???
retune
|
Re: tuned, but low numbers???
all of the above and that turbo makes more heat on my ls O0
|
Re: tuned, but low numbers???
Originally Posted by turbo4life
all of the above and that turbo makes more heat on my ls O0
what kind of numbers did you make? so i need to re route the dumptube change cat into test pipe the timing is change by the tuner |
All times are GMT -5. The time now is 07:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands