td04L question
#1
td04L question
is anyone using a td04l off of a wrx. if so what did you use for the oil inlet fitting? i've been everywhere and cant find anything that fits. next i'm gonna try the subaru dealer, any other suggestions?
#5
Re:td04L question
it's either 10mmx1.25 or 10mmx1.5. i used earls banjo to threaded hose end. try these part #'s:
977515 10mm banjo to 4mm threaded end
700145 1/4 super stock hose end
977515 10mm banjo bolt coarse (i think)
or
997520 (don't think it's this one).
get a couple extra sealing washers and stack them between the turbo and banjo.
i got those from barnett performance in atl. you can find their # at www.barnettperformance.com if you can't find them locally.
i also found some banjo and banjo bolts at napa too, but not all carry them locally.
your other option is to go to subaru and pay through the a## to get the oil fitting.
977515 10mm banjo to 4mm threaded end
700145 1/4 super stock hose end
977515 10mm banjo bolt coarse (i think)
or
997520 (don't think it's this one).
get a couple extra sealing washers and stack them between the turbo and banjo.
i got those from barnett performance in atl. you can find their # at www.barnettperformance.com if you can't find them locally.
i also found some banjo and banjo bolts at napa too, but not all carry them locally.
your other option is to go to subaru and pay through the a## to get the oil fitting.
#7
Re:td04L question
dood heres what you do. take a m10x1.5 bolt and drill out the center, then hack the head off and weld a proper fitting to the bolt, screw the basterd in (use some RTV on it) and away you go!
good luck, nothing like hmt remedie
good luck, nothing like hmt remedie
Thread
Thread Starter
Forum
Replies
Last Post