some more progress~ t4 boosted h22 eg updated and painted!!
13 Attachment(s)
Well i got my motor back from the shop. everything turned out pretty good too~
Attachment 21405 i brought them all of my parts, block (darton sleeves) crank stock pistons (wiseco 8.5:1) rods (crower) KZ speed balance shaft removal kit i pressed all that in before taking it to them. acl bearings gasket kit ARP main studs everything was in good order too! i was afraid of some specs like the crank from a toasted motor but it was good, and bearing size and piston size this block is bored 1mm over so im at 88mm Attachment 21406 Attachment 21407 got a good deal on them Attachment 21408 88mm 8.5 cr next month i will be taking my head in to get cleaned and springs installed and planned too. Attachment 21409 i have a cometic and ARP head studs, on order a clutch from LSD their own 6 puck hopefully i can put the bottom end in next weekend if the clutch gets here. come pics of my cage that was installed this fall. Attachment 21410 Attachment 21411 Attachment 21412 Attachment 21413 Attachment 21414Attachment 21415 Attachment 21416 and here is the color Attachment 21417 |
Re: some more progress~ h22 eg 56K GO FUCK YOUR BITCH
looks good!! the motor looks clean.
how much boost you planning on pushing? |
Re: some more progress~ h22 eg 56K GO FUCK YOUR BITCH
i have it all jammed right now it will be goin in for final paint this spring and be on the road i hope... :S i hope.. still need glass(windshield) radiator fuel pump injectors.. and a lot of other bullshit
E85 is going to be my fuel of choice :D 2.40 a gallon at 106 octane bitches. |
Re: some more progress~ h22 eg 56K GO FUCK YOUR BITCH
umm depending on how effecient my setup is.. seems to be alright minimal intercooler piping, and a turbo that spools pretty well, im hoping for 500 hp at least. and dd my wastegate is 8 but for fun 18-22 just depends on how much it takes to make my 500 mark 1000's on e85 are good for that and thats it.. then i have to go to 1600s for anymore but your milage drops and its not much of a dd then.. i will have to snatch some shot of the interior with my new recarro seat i picked up for 100 bones..
|
Re: some more progress~ h22 eg 56K GO FUCK YOUR BITCH
Not bad it looks good.
|
Re: some more progress~ h22 eg 56K GO FUCK YOUR BITCH
Looking good fool.... You gonna convert to the manual Timing belt tensioner??? Id think about it... Cant wait to see it done.
:6 |
Re: some more progress~ h22 eg 56K GO FUCK YOUR BITCH
Originally Posted by bigdaddyvtec
Looking good fool.... You gonna convert to the manual Timing belt tensioner??? Id think about it... Cant wait to see it done.
:6 |
Re: some more progress~ h22 eg 56K GO FUCK YOUR BITCH
LOVE the color choice! Sooooo, what all is different for you to run E85, because I thought motors that ran it were slightly different in the components they used or something. I've heard you're not suppose to run it if your car wasn't made to run it....Don't know thought, so I ask. :)
JP |
Re: some more progress~ h22 eg 56K GO FUCK YOUR BITCH
Get ready to break ----! Right BDVT, What mounts are you using? And what axles?
|
Re: some more progress~ h22 eg 56K GO FUCK YOUR BITCH
Originally Posted by widebody93
Get ready to break ----! Right BDVT, What mounts are you using? And what axles?
|
All times are GMT -5. The time now is 06:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands