some more progress~ t4 boosted h22 eg updated and painted!!
12-27-2007, 09:25 PM
#1
1.5 BAR
Thread Starter
Join Date: Feb 2006
Posts: 954
some more progress~ t4 boosted h22 eg updated and painted!!
Well i got my motor back from the shop. everything turned out pretty good too~
i brought them all of my parts,
block (darton sleeves)
crank stock
pistons (wiseco 8.5:1)
rods (crower)
KZ speed balance shaft removal kit i pressed all that in before taking it to them.
acl bearings
gasket kit
ARP main studs
everything was in good order too! i was afraid of some specs like the crank from a toasted motor but it was good, and bearing size and piston size
this block is bored 1mm over so im at 88mm
got a good deal on them
88mm 8.5 cr
next month i will be taking my head in to get cleaned and springs installed and planned too.
i have a cometic and ARP head studs,
on order a clutch from LSD their own 6 puck
hopefully i can put the bottom end in next weekend if the clutch gets here.
come pics of my cage that was installed this fall.
and here is the color
i brought them all of my parts,
block (darton sleeves)
crank stock
pistons (wiseco 8.5:1)
rods (crower)
KZ speed balance shaft removal kit i pressed all that in before taking it to them.
acl bearings
gasket kit
ARP main studs
everything was in good order too! i was afraid of some specs like the crank from a toasted motor but it was good, and bearing size and piston size
this block is bored 1mm over so im at 88mm
got a good deal on them
88mm 8.5 cr
next month i will be taking my head in to get cleaned and springs installed and planned too.
i have a cometic and ARP head studs,
on order a clutch from LSD their own 6 puck
hopefully i can put the bottom end in next weekend if the clutch gets here.
come pics of my cage that was installed this fall.
and here is the color
12-27-2007, 09:39 PM
#3
1.5 BAR
Thread Starter
Join Date: Feb 2006
Posts: 954
Re: some more progress~ h22 eg 56K GO ---- YOUR BITCH
i have it all jammed right now it will be goin in for final paint this spring and be on the road i hope... 
i hope.. still need glass(windshield) radiator fuel pump injectors.. and a lot of other bullshit
E85 is going to be my fuel of choice
2.40 a gallon at 106 octane bitches.
i hope.. still need glass(windshield) radiator fuel pump injectors.. and a lot of other bullshitE85 is going to be my fuel of choice
2.40 a gallon at 106 octane bitches.
12-27-2007, 09:43 PM
#4
1.5 BAR
Thread Starter
Join Date: Feb 2006
Posts: 954
Re: some more progress~ h22 eg 56K GO ---- YOUR BITCH
umm depending on how effecient my setup is.. seems to be alright minimal intercooler piping, and a turbo that spools pretty well, im hoping for 500 hp at least. and dd my wastegate is 8 but for fun 18-22 just depends on how much it takes to make my 500 mark 1000's on e85 are good for that and thats it.. then i have to go to 1600s for anymore but your milage drops and its not much of a dd then.. i will have to ****** some shot of the interior with my new recarro seat i picked up for 100 bones..
Id think about it... Cant wait to see it done.
12-28-2007, 05:11 PM
#8
3.0 BAR
Join Date: Mar 2005
Posts: 3,161
Re: some more progress~ h22 eg 56K GO ---- YOUR BITCH
LOVE the color choice! Sooooo, what all is different for you to run E85, because I thought motors that ran it were slightly different in the components they used or something. I've heard you're not suppose to run it if your car wasn't made to run it....Don't know thought, so I ask. 
JP
JP
swing from tree
