rc fuel injectors not going in all the way?
#1
rc fuel injectors not going in all the way?
i got some 440s rc's for my y8 i took everything off got them in the fuel rail sitting nice but the 2 bolts that hold down the fuel rail then you put the nuts on i tightened it fairly tight but my injectors are still really loose in there? What should i do about this to make them seal against the holes and the fuel rail? Thank you.
#5
Re: rc fuel injectors not going in all the way?
Originally Posted by t3t4
i have like a quarter of a cm left inbetween could i just use my grommets from my stock injectors and these injectors and make a double stacker.
https://www.homemadeturbo.com/tech_p...dsm_injectors/
#6
Re: rc fuel injectors not going in all the way?
i guess they just sit like that cuz i installed them and put in my ecu i did what you said and put the car in the on position a few times took off the banjo bolt thing fuel sprayed everywhere so i kno i had fuel pressure thanks for the help. it smells really rich with my base map and my idles goes up and down like it did with my stock injectors. maybe i can fix this when i get my wideband put in. thanks for the help guys.
Thread
Thread Starter
Forum
Replies
Last Post
Turblow
Hybrid/Tech
11
12-22-2006 09:23 PM
AgentMurdoc
Turbo Parts For Sale
4
11-06-2005 12:38 PM
eastbay92cx
Forced Induction
16
11-26-2004 06:48 PM
OnYx
General Discussion
18
04-19-2004 01:01 PM