post your boost pressure, and clutch specs
#3
Re: post your boost pressure, and clutch specs
Your question is misinformed, but since thats not something you could have found by searching, ill give you an answer.
95 Integra LS
bout 2600lbs
17lbs on a 16g, 280hp
generic pressure plate unknown origin
6puck sprung disk with "Ironman" material
Now go get a rope.
95 Integra LS
bout 2600lbs
17lbs on a 16g, 280hp
generic pressure plate unknown origin
6puck sprung disk with "Ironman" material
Now go get a rope.
#5
Re: post your boost pressure, and clutch specs
i want 10 psi on my d16Z2 goal = 200hp
now i drive @ 4,5 psi. but i dont have a clue how much hp that is..
so i was wondering if my clutch will hold 4,5
im going for a dyno tune next month, but i was hoping the stock clutch could hold the tuning and then later on save some money and buy a decent clutch.
now i drive @ 4,5 psi. but i dont have a clue how much hp that is..
so i was wondering if my clutch will hold 4,5
im going for a dyno tune next month, but i was hoping the stock clutch could hold the tuning and then later on save some money and buy a decent clutch.
#7
Re: post your boost pressure, and clutch specs
Originally Posted by RobertPadron
Clutches are rated at hp not psi. Just get a clutch that will be good for 100hp over the hp you think you're going to achieve incase you want to turn up the boost later on.
clutchmasters full face disk and pp i had held fine on my turbo gsr. was rated for 300 ft/lbs. i didnt need a puck my car was a dd at 10lbs