post your boost pressure, and clutch specs
08-24-2007, 10:10 PM
#11
3.0 BAR
Join Date: Mar 2005
Posts: 3,161
Re: post your boost pressure, and clutch specs
Originally Posted by mylude
---- i got a XTD off of ebay and its stage 3 6puck, fuckend sucks *****, im only boosting 8psi and making 216ft 207hp and that pice isnet even hold up, hhaa so much for ebay ----.
? Mine worked pretty well. I think JK has one in his drag hatch or atleast DID in one of his cars. Couple people run them with no issues.... You grease the input shaft too much? Trust me, that will ruin a clutch kit in a hurry.
JP
08-25-2007, 08:20 AM
#13
3.0 BAR
Join Date: Oct 2003
Location: Your mom's panties
Posts: 3,696
Re: post your boost pressure, and clutch specs
Z6 with 8.5:1 compression with a cheapo Autozone clutch (with a lifetime warranty mind you, I've already used it for a free clutch when I swapped the motor in) and 10lbs out of a 14b. Clutch holds strong no complaints after 5k. We'll see though, I may be getting a flywheel and puck clutch when I turn the boost up.
08-26-2007, 03:44 PM
#15
0.0 BAR
Join Date: Jan 2006
Location: Mother Fucking Washingtion
Posts: 0
Re: post your boost pressure, and clutch specs
Originally Posted by mylude
---- i got a XTD off of ebay and its stage 3 6puck, fuckend sucks *****, im only boosting 8psi and making 216ft 207hp and that pice isnet even hold up, hhaa so much for ebay ----.
What car and motor set up is it?
I'm guessing its a prelude from your name......
I have a xtd stg 3 in my a6 with a 60/48 @12psi and some drag radials and not a squeak of slipping. probably putting down around 215 hp at the wheels. My last setup put down 180tq and 175hp and now problem there eather.
08-30-2007, 01:20 PM
#16
0.5 BAR
Thread Starter
Join Date: Aug 2005
Posts: 187
Re: post your boost pressure, and clutch specs
@ crxvtec91
I have a d16z2 engine. Its only in europe i think. Im from the netherlands.
what kind of a clutch do you all recommend?
and where can i get one that ofcourse is cheap, and ships to the netherlands.
I have a d16z2 engine. Its only in europe i think. Im from the netherlands.
what kind of a clutch do you all recommend?
and where can i get one that ofcourse is cheap, and ships to the netherlands.
08-30-2007, 01:33 PM
#17
3.0 BAR
Join Date: Apr 2005
Posts: 6,036
Re: post your boost pressure, and clutch specs
try www.lsdmotorsports.com and ask mike if he'll ship to ------lands, i mean netherlands
08-30-2007, 02:01 PM
#18
Banned
Join Date: Aug 2003
Posts: 2,898
Re: post your boost pressure, and clutch specs
Originally Posted by RobertPadron
Clutches are rated at hp not psi. Just get a clutch that will be good for 100hp over the hp you think you're going to achieve incase you want to turn up the boost later on.
08-30-2007, 02:15 PM
#19
3.0 BAR
Join Date: Dec 2005
Posts: 2,299
Re: post your boost pressure, and clutch specs
Originally Posted by LSD Motorsports
Lol, its actually the opposite of what you said. The pressure plate is rated in PSI, with that pressure and a few other factors, # of disk contact surfaces, radius of gyration and disk material coefficient of friction, you can then calculate the tq capacity of the clutch. That still doesnt tell you how much HP the clutch is rated for. Not an attack on you though, just clearing that up.
if so, an auto with 7psi on a 3800 v6===2 months of a slow death to the 440t4 that was stock with 135k.
