Post pics of your H22 turbo manifold/setup
07-13-2008, 12:01 PM
#1
1.0 BAR
Thread Starter
Join Date: May 2008
Posts: 308
Post pics of your H22 turbo manifold/setup
I just picked up a built H22 swap for my 91 CRX for free basically (I'm doing a swap in his ek). Right now the setup has STR manifold thats seems decent but I'm also willing to change it possibly. The STR manifold seems to push the turbo straight out and Im not really trying to hack up/remove my radiator support. I'm just trying to see some other setups so I can get a few ideas. I'll post pics later of the current setup so you can see what I'm talking about
07-13-2008, 01:36 PM
#2
0.0 BAR
Join Date: Jun 2003
Posts: 0
Re: Post pics of your H22 turbo manifold/setup
Originally Posted by boostedhfrex
I just picked up a built H22 swap for my 91 CRX for free basically (I'm doing a swap in his ek). Right now the setup has STR manifold thats seems decent but I'm also willing to change it possibly. The STR manifold seems to push the turbo straight out and Im not really trying to hack up/remove my radiator support. I'm just trying to see some other setups so I can get a few ideas. I'll post pics later of the current setup so you can see what I'm talking about
07-13-2008, 04:16 PM
#3
3.0 BAR
Join Date: Jan 2006
Posts: 1,605
Re: Post pics of your H22 turbo manifold/setup
I'm running the Ching chong ram horn"egay" with the turbo backwards. Intake of turbo facing the passenger side and the exhaust VBAND barely clearing the alternator brasket. Then made a relocation pipe for the waste gate. But in order to get the H1C to fit I had to gring the ---- out of the block. LOL
07-13-2008, 07:58 PM
#4
1.0 BAR
Thread Starter
Join Date: May 2008
Posts: 308
Re: Post pics of your H22 turbo manifold/setup
Originally Posted by crxvtec91
Thats going to be a tight fit. My crx with a lsvtec and half rad; well there almost no space now, kinda. You might have to run a log mani.
Originally Posted by widebody93
I'm running the Ching chong ram horn"egay" with the turbo backwards. Intake of turbo facing the passenger side and the exhaust VBAND barely clearing the alternator brasket. Then made a relocation pipe for the waste gate. But in order to get the H1C to fit I had to gring the ---- out of the block. LOL
http://www.innovativemounts.com/Prod...ductCode=59185
07-13-2008, 08:16 PM
#5
0.0 BAR
Join Date: Jun 2003
Posts: 0
Re: Post pics of your H22 turbo manifold/setup
Originally Posted by boostedhfrex
It'll fit, theres a local guy with a white crx has a H22 with a custom equilength manifold ramhorn manifold.
Originally Posted by crxvtec91
Thats going to be a tight fit.
07-13-2008, 08:34 PM
#6
3.0 BAR
Join Date: Jan 2006
Posts: 1,605
Re: Post pics of your H22 turbo manifold/setup
Originally Posted by boostedhfrex
It'll fit, theres a local guy with a white crx has a H22 with a custom equilength manifold ramhorn manifold.
Are you running a alternator relocation bracket? This will drop the altermator down to the spot where the a/c compressor normally sits. Heres a link, this might help you:
Are you running a alternator relocation bracket? This will drop the altermator down to the spot where the a/c compressor normally sits. Heres a link, this might help you:
http://videos.streetfire.net/video/H...ter_127227.htm
07-13-2008, 09:57 PM
#7
1.0 BAR
Thread Starter
Join Date: May 2008
Posts: 308
Re: Post pics of your H22 turbo manifold/setup
Originally Posted by widebody93
No I am not here here is a video of it
http://videos.streetfire.net/video/H...ter_127227.htm
http://videos.streetfire.net/video/H...ter_127227.htm
07-14-2008, 02:01 AM
#10
1.0 BAR
Thread Starter
Join Date: May 2008
Posts: 308
Re: Post pics of your H22 turbo manifold/setup
If my old roomate could spool one with a volvo at 4k I'm sure I could do the same since our honda head flow 3x as much. The one I'm looking at has a 12cm housing so it should be no problem
