HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Post pics of your H22 turbo manifold/setup (https://www.homemadeturbo.com/forced-induction-7/post-pics-your-h22-turbo-manifold-setup-93549/)

boostedhfrex 07-13-2008 12:01 PM

Post pics of your H22 turbo manifold/setup
 
I just picked up a built H22 swap for my 91 CRX for free basically (I'm doing a swap in his ek). Right now the setup has STR manifold thats seems decent but I'm also willing to change it possibly. The STR manifold seems to push the turbo straight out and Im not really trying to hack up/remove my radiator support. I'm just trying to see some other setups so I can get a few ideas. I'll post pics later of the current setup so you can see what I'm talking about

seerex 07-13-2008 01:36 PM

Re: Post pics of your H22 turbo manifold/setup
 

Originally Posted by boostedhfrex
I just picked up a built H22 swap for my 91 CRX for free basically (I'm doing a swap in his ek). Right now the setup has STR manifold thats seems decent but I'm also willing to change it possibly. The STR manifold seems to push the turbo straight out and Im not really trying to hack up/remove my radiator support. I'm just trying to see some other setups so I can get a few ideas. I'll post pics later of the current setup so you can see what I'm talking about

Thats going to be a tight fit. My crx with a lsvtec and half rad; well there almost no space now, kinda. You might have to run a log mani.

widebody93 07-13-2008 04:16 PM

Re: Post pics of your H22 turbo manifold/setup
 
I'm running the Ching chong ram horn"egay" with the turbo backwards. Intake of turbo facing the passenger side and the exhaust VBAND barely clearing the alternator brasket. Then made a relocation pipe for the waste gate. But in order to get the H1C to fit I had to gring the ---- out of the block. LOL

boostedhfrex 07-13-2008 07:58 PM

Re: Post pics of your H22 turbo manifold/setup
 

Originally Posted by crxvtec91
Thats going to be a tight fit. My crx with a lsvtec and half rad; well there almost no space now, kinda. You might have to run a log mani.

It'll fit, theres a local guy with a white crx has a H22 with a custom equilength manifold ramhorn manifold.


Originally Posted by widebody93
I'm running the Ching chong ram horn"egay" with the turbo backwards. Intake of turbo facing the passenger side and the exhaust VBAND barely clearing the alternator brasket. Then made a relocation pipe for the waste gate. But in order to get the H1C to fit I had to gring the ---- out of the block. LOL

Are you running a alternator relocation bracket? This will drop the altermator down to the spot where the a/c compressor normally sits. Heres a link, this might help you:
http://www.innovativemounts.com/Prod...ductCode=59185

seerex 07-13-2008 08:16 PM

Re: Post pics of your H22 turbo manifold/setup
 

Originally Posted by boostedhfrex
It'll fit, theres a local guy with a white crx has a H22 with a custom equilength manifold ramhorn manifold.



Originally Posted by crxvtec91
Thats going to be a tight fit.


widebody93 07-13-2008 08:34 PM

Re: Post pics of your H22 turbo manifold/setup
 

Originally Posted by boostedhfrex
It'll fit, theres a local guy with a white crx has a H22 with a custom equilength manifold ramhorn manifold.

Are you running a alternator relocation bracket? This will drop the altermator down to the spot where the a/c compressor normally sits. Heres a link, this might help you:

No I am not here here is a video of it
http://videos.streetfire.net/video/H...ter_127227.htm

boostedhfrex 07-13-2008 09:57 PM

Re: Post pics of your H22 turbo manifold/setup
 

Originally Posted by widebody93
No I am not here here is a video of it
http://videos.streetfire.net/video/H...ter_127227.htm

jdm shot ftw... hows the holset run? I was thinkn about running a HX35 on mine

seerex 07-13-2008 11:02 PM

Re: Post pics of your H22 turbo manifold/setup
 

Originally Posted by boostedhfrex
jdm shot ftw... hows the holset run? I was thinkn about running a HX35 on mine

A Hx-35 is huge, about the size of a 1 gallon water.

widebody93 07-13-2008 11:27 PM

Re: Post pics of your H22 turbo manifold/setup
 
SO is the H1C

It's a big mo fo with a 18cm housing

Gots a 12 on the way

boostedhfrex 07-14-2008 02:01 AM

Re: Post pics of your H22 turbo manifold/setup
 
If my old roomate could spool one with a volvo at 4k I'm sure I could do the same since our honda head flow 3x as much. The one I'm looking at has a 12cm housing so it should be no problem


All times are GMT -5. The time now is 12:08 AM.


© 2024 MH Sub I, LLC dba Internet Brands