porting the HF manifold
01-26-2005, 01:51 PM
#31
0.5 BAR
Join Date: Jan 2005
Posts: 114
Re:porting the HF manifold
If you flush it with water. I'm thinking you should flush it backwards i.e. in the opposite direction the exhaust flows through it.No sense in forcing metal in to the turbine area if you dont have to.
Why not just grind the welds off, port it, and weld the thing back together.
Just my .02
Why not just grind the welds off, port it, and weld the thing back together.
Just my .02
01-26-2005, 04:21 PM
#33
1.0 BAR
Join Date: May 2003
Posts: 326
Re:porting the HF manifold
If you flush it with water. I'm thinking you should flush it backwards i.e. in the opposite direction the exhaust flows through it.No sense in forcing metal in to the turbine area if you dont have to.
Why not just grind the welds off, port it, and weld the thing back together.
Why not just grind the welds off, port it, and weld the thing back together.
01-27-2005, 11:06 AM
#34
0.5 BAR
Join Date: May 2004
Posts: 80
Re:porting the HF manifold
good point on the serperating it,. but might be to much work, id say if your going to keep it together, takes some old rags, wet them till there damp, thencramp them down there. othere then that you might be screwed,
Thread
Thread Starter
Forum
Replies
Last Post
