porting a HF/VX manifold
#2
Re:porting a HF/VX manifold
Ya I ported that ------- manifold because adam doesnt know how to port.
and yes, you need to atleast "Port Match" the manifold to the head. otherwise ... well its lame
Takes about 10 mins with a die grinder and good bit.
Jeff
and yes, you need to atleast "Port Match" the manifold to the head. otherwise ... well its lame
Takes about 10 mins with a die grinder and good bit.
Jeff
#5
#7
Re:porting a HF/VX manifold
I have heard this term a thousand times, but been shown or attempted the process. "port" as in port and polish- to port a head,
enlarging the intake or exhaust ports ? is that what it means to port something.
ps: im not stupid, just uninformed.
enlarging the intake or exhaust ports ? is that what it means to port something.
ps: im not stupid, just uninformed.
#8
Re:porting a HF/VX manifold
I just finished porting my manifold today. It's the 92 civic VX manifold in perfect shape. I used a dremel tool.... I know, I should have used a die grinder, but my air tank is too small to hold a charge. It turned out very smooth, and took about 30 min (of some hard 'dremeling').
Thread
Thread Starter
Forum
Replies
Last Post