Re: Pics of my first dual cam zcrx
 

Haha, looks nice Aaron. My old wheels actually look pretty good ;)

I need to take a ride in the beast.

Re: Pics of my first dual cam zcrx
 

You're big pimpin. I have to call a barbeque soon. TC in da house. O0

Re: Pics of my first dual cam zcrx
 

Did a little tuning today, got it turned up to 16psi and it rips hard >:D. Ill have to work on a better vid

Re: Pics of my first dual cam zcrx
 

Make sure to bring it over before you blow it up. >:D

Re: Pics of my first dual cam zcrx
 

hey for the guy who posted this topic where did u get those cam gears from and are u running cams in that car cause i have a dohc zc and it runs good on 8 pis im looking for cams and cam gears...have any ideas..

Re: Pics of my first dual cam zcrx
 

yea also interested what motor the gears are for i hear the d16 ones dont work but the b-series do whats up

Re: Pics of my first dual cam zcrx
 

The cam gears are AEM's they came with the motor when I bought it. They are for B series because the marks on the exhaust gear are one tooth off. There are holes through the cam caps and cams which indicate when your at tdc. The B series work fine you just need to ignore the exhaust cams tdc marks. I am using stock cams for now, when im ready to upgrade ill send mine into crower to be reground. Here is the info I got when I emailed them..

Regrinds on your stock cams are available. Specs are typically 10-15
degrees
more duration and .010"-.015" more lift. HP gains are in the 5-15 range
depending on tuning. Rough idle is common if we exceed the above
figures.

Cost is $95 per cam. Allow 1 week shop time + shipping. Send cores
along
with detailed note stating engine model, intended application, power
adders
(turbo, NOS, etc), rpm range to address below.

Thanks for your interest in Crower,

Crower Cams & Equipment Co Inc
6180 Business Center Court
San Diego CA 92154-5604 USA
Phone: 619-661-6477
Fax: 619-661-6466
http://www.crower.com

Re: Pics of my first dual cam zcrx
 

Web cams, Gude, and JG used to make gears and cams for D16A1/8/9, EW3/4, and D15A2/3 I don't think they were big cams just like 264* or 268* something like that. Old Skool POWA!

Re: Pics of my first dual cam zcrx
 

i have stage 2 exospeed cams in mine and i love them they are a tad bit milder than a stage 2 skunk 2 but they shift the band great how a stock cam zc starts pulling real hard about 3500 mine pulls from 1000-7500 hard and doesnt give up. coantact exospeed for details

Re: Pics of my first dual cam zcrx
 

i Miss my ZC RIP little buddy.

Its OK im buying another 4 door and it shall find a new home their. :)