What does the oil pressure sensor look like. This is where I'm going to tap into for my turbo. I saw something right above where the oil filter is and it looks like a fat rubber piece connected to the block with some wires coming out of it. Is that it? If so what do I do with the oil pressure sensor?

 

yes that is it... you need to unhook it and get like 30 adapters (not really) and run a couple t's

search on honda-tech for "oil feed" , you will find countless posts regarding what size line to use, part numbers, prices, ect

ill give you a hint the key is to get a male 1/8 bsp to female 1/8 NPT adapter AND a femal 1/8 bsp to 1/8 NPT adapter

those 2 alone will run you about 20 bux then like 10 for the rest of the fittings and some -3 an lines going from your engine block to the firewall where you mount the t's that tun to the stock oil sender (that thing with the boot), turbo, and guage if you have one.